19
GB
ServiceTroubleshootingPrecautions CareProgrammes DetergentsInstallation Description
Personalisations
Setting the temperature
Turn the TEMPERATURE knob to set the wash temperature (see Programme table on page 18).
The temperature can be lowered, or even set to a cold wash (
).
Functions
To enable a function:
1. press the button corresponding to the desired function, according to the table below;
2. the function is enabled when the corresponding button is illuminated.
Note: The rapid flashing of the button indicates that the corresponding function cannot be selected for the
programme set.
Function Effect Comments
Enabled with
programmes:
Rapid
Cuts the duration
of the wash cycle
by 30%.
1, 2, 3, 4,
5, 6, 7
Extra Rinse
Increases the
efficiency of the
rinse.
Recommended when the appliance has a full load or with large
quantities of detergent.
1, 2, 3, 4, 5,
6, 7 and
Rinse cycles.
Spin
exclusion
The washing
machine will not
carry out a spin
cycle, but rather
a drum spin at
medium speed to
assist water
draining.
We recommend that you use it when washing garments which are
difficult to iron.
All
programmes
except for 10
and draining.
Anti-crease
This function interrupts the wash programme, and the washing is left to soak in water before the appliance is drained. It is
enabled in programmes 5 - 6 - 7 - 9- 10 and Delicate rinse cycle.
To conclude the cycle, press the START/PAUSE button.
To run the draining cycle alone, set the knob to the relative symbol
and press the START/PAUSE button.
To Next Page
Loading...
