Indesit WITP 102 - Personalisation; Setting the Wash Temperature; Available Function Options

67
GB
Personalisations
Setting the temperature
Turn the TEMPERATURE knob to set the wash temperature (see Programme table on page 66).
The temperature can be lowered, or even set to a cold wash ( ).
 To avoid excessive vibrations, before every spin cycle the machine distributes the load in a uniform manner by
continuously rotating the drum at a speed which is slightly faster than the normal washing speed.
When, despite repeated attempts, the load is still not evenly distributed, the machine spins at a lower speed than
the set frequency.
If the load is excessively unbalanced, the machine attempts to distribute it instead of spinning.
The balancing attempts may extend the total duration of the cycle, up to a maximum of 10 minutes.
Functions
To enable a function:
1. press the button corresponding to the desired function, according to the table below;
2. the function is enabled when the corresponding button is illuminated.
Note: The rapid flashing of the button indicates that the corresponding function cannot be selected for the
programme set.
C
Option Effect Comments Enabled with
programmes:
Bleaching
Bleaching
cycle designed
to remove the
toughest
stains.
Please remember to pour the bleach into extra
compartment 4 (se
e page 68)
.
2, 3, 4, 5, 6,
7, 8
Rinse
cycles.
Extra Rinse
Increases the
efficiency of
the rinse.
Recommended when the appliance has a full load
or with large quantities of detergent.
1, 2, 3, 4, 5,
6, 7, 8 and
Rinse
cycles.
Reduces the
spin speed.
All
programmes
except for
11 and
draining.
Anti-crease
Reduces fabric
creasing,
making ironing
easier.
Setting this function will interrupt programmes 6,
7, 8, 10, 11, Delicate Rinse with a laundry soak
(Anti-crease) and the Rinse phase indicator light
will blink.
To complete the cycle, press the Anti-crease
button.
6, 7, 8, 10,
11, Delicate
Rinse.
Downloaded From WashingMachine-Manual.com Manuals