Indesit WITP82 - Personalisations; Setting the Temperature; Functions

7
GB
ServiceTroubleshootingPrecautions CareProgrammes DetergentsInstallation Description
Personalisations
Setting the temperature
Turn the TEMPERATURE knob to set the wash temperature (see Programme table on page 6).
The temperature can be lowered, or even set to a cold wash ( ).
Functions
To enable a function:
1. press the button corresponding to the desired function, according to the table below;
2. the function is enabled when the corresponding button is illuminated.
Note: The rapid flashing of the button indicates that the corresponding function cannot be selected for the
programme set.
C
Opti on
Effect Comments
Enabled with
programmes:
Bleaching
Bleaching cycle
designed to
remove the
toughest stains.
Please remember to pour the bleach into extra compartment 4
(se
e page 8)
.
2, 3, 4, 5, 6,
7, 8
Rinse cycles.
Extra Rinse
Increases the
efficiency of the
rinse.
Recommended when the appliance has a full load or with large
quantities of detergent.
1, 2, 3, 4, 5,
6, 7, 8 and
Rinse cycles.
Reduces the
spin speed.
All
programmes
except for 11
and draining.
Anti -crease
Reduces fabric
creasing,
making ironing
easier.
Setting this function will interrupt programmes 6, 7, 8, 10, 11,
Delicate Rinse with a laundry soak (Anti-crease) and the Rinse
phase indicator light will blink.
To complete the cycle, press the Anti-crease button.
6, 7, 8, 10,
11, Delicate
Rinse.