Need help?Do you have a question about the Index Braille V4 and is the answer not in the manual?
Procedures for unpacking the embosser, removing transport locks, and checking shipment contents.
Guidance on powering on, selecting layouts, installing drivers, and performing initial tests.
Instructions for connecting the embosser via USB and network IP addresses.
Steps to verify correct printer driver installation using a test print.
Explanation of the primary functions controlled by the embosser's buttons and menu keys.
Details on configuring paper sizes, margins, and line spacing for embossing.
A breakdown of the embosser's menu hierarchy and available options.
Configuration options for network, serial communication, and system parameters.
Practical examples demonstrating how to use specific menu functions, like changing settings.
Lists of pre-defined and customer-defined paper sizes supported by the embosser.
Instructions for loading paper and clearing paper jams on the Basic-D model.
Procedures for setting up the sheet feeder, handling paper, and resolving out-of-paper issues.
Steps for loading paper and removing documents from the Braille Box paper tray.
Explanation of the front panel and interface LEDs indicating embosser status and errors.
Guidance on upgrading embosser firmware and speech feedback languages.
Essential checks to perform before contacting technical support for assistance.
A comprehensive list of error codes and their meanings for troubleshooting.
Information on embosser connection ports and procedures for system reset.
General| Braille Grade | Grade 1 and Grade 2 |
|---|---|
| Interpoint Braille | Yes |
| Braille Cell | 6-dot or 8-dot |
| Connectivity | USB |
| Operating System Compatibility | Windows, Linux |
| Model | Index Braille V4 |
To Next Page
