This document is the 2024 Indian FTR Owner's Manual, providing essential information for the safe operation and proper maintenance of the Indian Motorcycle FTR, FTR Rally, FTR Sport, FTR R Carbon, and FTR X 100% R Carbon models.
Function Description:
The manual serves as a comprehensive guide for owners, covering various aspects of the motorcycle from basic operation to detailed maintenance procedures. It emphasizes safety precautions, proper riding practices, and the importance of regular maintenance to ensure the longevity and optimal performance of the vehicle. It also includes information on the motorcycle's features and controls, troubleshooting, cleaning, storage, and warranty details.
Important Technical Specifications:
The manual provides detailed specifications for the FTR models, including:
-
Dimensions:
- Overall Length: 87.9 in (2235 mm)
- Overall Width: 33.9 in (862 mm)
- Overall Height: 44 in (1120 mm)
- Unladen Seat Height: 32.7 in (830 mm)
- Wheelbase: 60.2 in (1529 mm)
- Ground Clearance: 6.2 in (157 mm)
- Rake (frame)/Trail: FTR Rally: 26.3 Degrees/5.1 in (130.0 mm); FTR / FTR Sport / FTR R Carbon / FTR X 100% R Carbon: 25.3 Degrees/3.9 in (99.9 mm)
-
Weight (Dry, without fuel/fluids):
- FTR: 496 lb (225 kg)
- FTR Sport: 501 lb (227 kg)
- FTR Rally: 503 lb (228 kg) (EU Only - 511 lb (232 kg))
- FTR R Carbon / FTR X 100% R Carbon: 493 lb (224 kg)
-
Weight (Wet, with fuel/fluids):
- FTR: 514 lb (233 kg)
- FTR Sport: 522 lb (237 kg)
- FTR Rally: 520 lb (236 kg) (EU Only - 534 lb (242 kg))
- FTR R Carbon / FTR X 100% R Carbon: 518 lb (235 kg)
-
Capacities:
- Radiator Coolant: 1.1 qt (2.0 L)
- Engine Oil: 4.4 qt (4.16 L) Dry Engine
- Fuel: 3.4 gal (13.0 L)
- Fuel Reserve (fuel light on): 0.5 gal (1.9 L)
- Fork Oil: Non-Adjustable: 17.5 ± 0.2 fl oz (519 ± 6 cm³); Adjustable: 17.1 ± 0.2 fl oz (508 ± 6 cm³); Adjustable: 18.4 ± 0.2 fl oz (544 ± 6 cm³)
-
Wheels / Tires:
- Front Wheel Size/Type: FTR Rally: 19 in (48.26 cm) x 3.00 in (7.62 cm) Cast; Other FTR models: 17 in (43.18 cm) x 3.50 in (8.89 cm) Cast
- Rear Wheel Size/Type: FTR Rally: 18 in (45.72 cm) x 4.25 in (10.80 cm) Cast; Other FTR models: 17 in (43.18 cm) x 5.5 in (13.97 cm) Cast
- Front Tire Type/Size: FTR Rally: 120/70 R19 60V; Other FTR models: 120/70 ZR17 58W
- Rear Tire Type/Size: FTR Rally: 150/70 R18 70V; Other FTR models: 180/55 ZR17 73W
- Tire Pressure: Front: 36 psi (248 kPa); Rear: 40 psi (276 kPa)
-
Chassis:
- Front Suspension Type/Travel: Inverted Telescopic Cartridge Fork / 150 mm (FTR Rally); Adjustable Inverted Telescopic Cartridge Fork / 120 mm (Other FTR models)
- Front Fork Tube Diameter: 43 mm
- Rear Suspension Type/Travel: Monotube IFP / 150 mm (FTR Rally); Piggyback IFP / 130 mm (Other FTR models)
- Swingarm: Steel
- Front Brakes: Dual / 320 mm x t5 Rotor / 4-Piston Caliper
- Rear Brakes: Single/ 260 mm x t5 Rotor / 2-Piston Caliper
-
Engine:
- Engine Type: Liquid Cooled V-Twin (60 Degrees)
- Displacement: 73 Cid (1203 cc)
- Compression Ratio: 12.5 : 1
- Valve Train: DOHC, 4 Valves Per Cylinder, Graded Buckets
- Bore and Stroke: 102 mm x 73.6 mm
- Fuel System/Throttle Body Bore: Closed Loop Fuel Injection / Dual 60 mm Bore
- Exhaust System: Two O2 Sensors (one in each bank), Single three-way catalyst in resonator
- Rev Limit: 9000 RPM
- Idle RPM: 1250 RPM +/- 50 RPM (Fully Warm)
- Lubrication System: Semi-Dry Sump
- Spark Plug/Gap: NGK® MR7F 0.030 in (0.80 mm)
-
Drivetrain:
- Primary Drive: Gear Drive Wet Clutch
- Crank Gear: 46–Tooth
- Clutch Gear: 77–Tooth
- Clutch Type: Wet, Assist & Slip, Multi-Plate
- Primary Reduction Ratio: 1.674 : 1
- Transmission Type: 6 Speed / Constant-Mesh / Foot Shift
- Gear Shift Pattern: 1 Down / 5 Up
- Final Drive Type: Chain / 525HV3X / 116 Link (FTR Rally); Chain / 525HV3X / 114 Link (Other FTR models)
-
Electrical:
- Alternator: 460W @ 3000 RPM
- Battery: 12 V, 12AH, 240 CCA, Maintenance Free AGM
- Voltage Regulator: 14.5 V / 32 A
- Headlight: Non-Serviceable LED
- Tail/Brake Light: Non-Serviceable LED
- Turn Signal: Non-Serviceable LED
- License Plate: Non-Serviceable LED
- Speedometer: Non-Serviceable LED
- Indicator Lights: Non-Serviceable LED
- Position Bulb: Non-Serviceable LED
Usage Features:
- Ignition/Light Key Switch: Controls electrical functions, with positions for Steering Lock, OFF, RUN, and PARK. Headlights are automatically on when the engine is running.
- Engine Stop/Run Switch: Allows quick engine shutdown (STOP) and enables engine start/run (RUN).
- Starter Switch: Engages the starter motor when the engine stop/run switch is in RUN.
- Horn Switch: Activates the horn.
- High/Low Headlight Beam Switch: Toggles between high and low beams, with a "Flash to Pass" momentary feature.
- Turn Signal Switch: Activates left or right turn signals, with an automatic cancellation feature based on speed/distance and a momentary feature.
- Emergency Flasher Switch (Hazard Switch): Activates/cancels all four turn signals as hazard lights.
- Cruise Control Switch: Activates and adjusts cruise control (Set/Decelerate, Off/On, Resume/Accelerate).
- Right-Hand Trigger Switch: On analog gauge models, cycles through multi-function display (MFD) modes. On Ride Command models, navigates through menus.
- Instrument Cluster: Includes speedometer, indicator lamps, and a multi-function display (MFD) showing odometer, trip odometers, engine speed, gear indicator, battery voltage, engine error codes, fuel economy, and ambient air temperature.
- Display Units (Standard/Metric): Allows switching between miles/kilometers, Fahrenheit/Celsius, 12-hour/24-hour clock, and gallons/liters.
- Clock: Displays time, adjustable via the right-hand trigger switch.
- Engine Error Codes: Displays diagnostic codes on the MFD if a fault occurs.
- Misfire Detection: Flashing check engine light and fuel cut to affected cylinders if misfire is detected.
- Rear Cylinder Deactivation: Shuts down the rear cylinder at operating temperature and idle speed to reduce heat to the rider (can be enabled/disabled).
- Throttle Control Grip: Controls engine speed; spring-loaded to return to idle.
- Gear Shift Lever: Foot-operated lever for six-speed transmission.
- Clutch Lever: Hand-operated lever to disengage/engage the clutch for shifting.
- Side-Stand: Equipped with a safety switch to prevent operation when deployed.
- Anti-Lock Brake System (ABS): Reduces brake pressure to prevent wheel lock-up during hard braking.
- Front Brake Lever: Controls front brakes.
- Rear Brake Pedal: Controls rear brake.
- Ride Command (If Equipped): Touchscreen display with features like:
- Display Screens: Gauge, Bike Information (ambient temp, engine temp, battery voltage, fuel range), Ride Information (ride time, distance, elevation, trip odometer), Maps and Navigation, Audio, and Controls (ride mode, brightness).
- Ride Modes: Rain (smoother throttle), Standard (crisp throttle, balanced power), Sport (quick throttle response, aggressive power).
- Settings Menu: Information (VIN, mileage, software version, oil change interval), General (themes, Bluetooth® devices, language, speed/temperature units, software update), Time (format, GPS time, manual set), and Vehicle (oil life/service reset, diagnostics).
- Bluetooth® Pairing: Connects to smartphones and headsets.
- Connected Services: Real-time traffic, weather, destination search (subscription may be required).
- USB Port: Powers devices and updates display software.
Maintenance Features:
- Pre-Ride Inspections: Recommended checks before each ride, including electrical systems (headlight, taillight/brakelight, turn signals, hazard flashers, horn, neutral indicator, low oil pressure indicator, engine stop/run switch), engine oil level, fuel level, coolant level, fluid leaks, tires (condition, pressure, tread depth), brake operation, brake fluid levels, brake components, throttle, clutch, front suspension, rear suspension, rear drive chain, side stand, and fasteners.
- Periodic Maintenance Table: Outlines required maintenance and inspection intervals (500, 2,500, 5,000, 10,000, 15,000, 20,000, 25,000, 30,000, 35,000, 40,000, 45,000, 50,000 miles/km).
- Engine Oil & Filter Change: Detailed procedure for draining oil, replacing the filter, and refilling with recommended Indian Motorcycle 15W-60 Full Synthetic engine oil. Torque specifications for drain plug (15 ft-lbs / 20 N·m) and oil filter (115 in-lbs / 13 N·m).
- Air Filter Replacement: Instructions for accessing and replacing the air filter element. Torque specifications for bodywork alignment bracket (96 in-lbs / 11 N·m), airbox cover (36 in-lbs / 4 N·m), and airbox bezel (36 in-lbs / 4 N·m).
- Cooling System: Coolant level inspection and adding coolant. Recommended use of Antifreeze 50/50 Premix.
- Chain Tension Adjustment: Procedure for measuring and adjusting drive chain tension. Specifications: 1.30-1.57 in (33-40 mm) deflection at 10 lbs force. Torque specifications for swing arm jam nut (12 in-lbs / 1.36 N·m) and axle nut (rear) (92 ft-lbs / 125 N·m).
- Chain Stretch Inspection: Procedure for measuring chain stretch. Specification: 12.56 in (319 mm) or less.
- Rear Shock Preload Inspection and Adjustment: Table for recommended preload based on combined rider, passenger, and cargo weight. Instructions for adjusting preload using a shock spanner wrench.
- Rear Shock Factory Settings: Provides rebound and compression damping settings for different FTR models and riding types.
- Front Fork/Suspension Inspection: Checks for oil leaks, damage, and smooth operation.
- Front Fork Adjustment Guide and Factory Settings: Provides rebound, compression, and preload settings for different FTR models and riding types.
- Steering Head Inspection: Checks for smooth movement, looseness, and wheel bearing rotation.
- Fuel System Components Inspection: Checks fuel hoses and connections for cracks, damage, or leaks.
- Crankcase Breather Hoses Inspection: Checks hoses for restrictions, kinks, cracks, or damage.
- Throttle Control Inspection: Checks for smooth rotation and return of the throttle grip.
- Evaporative Emission Control System Inspection: Checks EVAP lines and connections for abrasion, wear, and secure attachment.
- Mechanical Clutch Lever Free Play Adjustment: Procedure for measuring and adjusting clutch lever free play. Specification: 0.019–0.059 in (0.5–1.5 mm).
- Clutch Lever Lubrication: Instructions for lubricating pivot bolt and barrel ends.
- Side Stand Lubrication: Periodically lubricates the side stand bushing.
- Rear Brake Pedal Lubrication: Lubricates the pivot bushing.
- Brake Hoses/Connections Inspection: Checks for dampness, stains, and proper torque.
- Front Brake Pad Inspection: Visual inspection of wear indicator grooves.
- Rear Brake Pad Inspection: Visual inspection of wear indicator grooves.
- Brake Disc Inspection/Cleaning: Checks for nicks, scratches, cracks, damage, and minimum thickness (0.18 in / 4.5 mm).
- Wheel Inspection: Checks for cracks or damage.
- Wheel Alignment: Inspection at regular service intervals.
- Front Wheel Removal / Installation: Detailed procedure for removing and installing the front wheel. Torque specifications for axle (front fork) (55 ft-lbs / 75 N·m) and axle pinch fasteners (14 ft-lbs / 19 N·m).
- Tire Condition, Tread Depth, and Pressure: Guidelines for inspecting tires and maintaining proper inflation.
- Seat Removal and Installation: Instructions for removing and reinstalling the seat. Torque specifications for seat fasteners (84 in-lbs / 9.5 N·m) and passenger grab handle fasteners (19 ft-lbs / 26 N·m).
- Spark Plugs: Specifications for spark plug type (NGK® MR7F), gap (.030 in / 0.80 mm), and torque (7.5 ft-lbs / 10 N·m).
- Headlight Aim Inspection and Adjustment: Procedure for checking and adjusting headlight aim. Torque specification for headlight adjustment fastener (25 ft-lbs / 34 N·m).
- Headlight Cowl Removal and Headlight Removal: Instructions for removing these components.
- Battery Removal and Installation: Procedures for disconnecting/connecting battery terminals and removing/installing the battery. Torque specifications for battery terminal fastener (25 in-lbs / 3 N·m) and battery cover fastener (36 in-lbs / 4 N·m).
- Battery Charging and Maintenance: Recommendations for using an AGM battery charger (BatteryMINDer® 2012 AGM - 2 A) and tips for prolonging battery life.
- Fuse Replacement: Instructions for accessing and replacing fuses. Torque specification for V-Cover fastener (36 in-lbs / 4 N·m).
- Elevating the Motorcycle: Guidance on safely supporting the motorcycle for service.
- Fastener Inspection and Torques: General inspection of fasteners and reference to the service manual for specific torque values.
- Cleaning and Storage: Recommendations for cleaning products, washing the motorcycle (avoiding pressurized water), windshield care, gloss and matte clear coat finish care, storage area preparation, fuel stabilizer, tire inflation, engine protection, cooling system, and rodent deterrence during storage.
- Removal From Storage: Steps to prepare the motorcycle for use after storage, including battery installation, oil level check, fluid leak inspection, removal of protective covers, fuel level check, pre-ride inspections, road test, and cleaning.
Need help?
General
To Next Page