Need help?Do you have a question about the Indiana Line Basso 830 and is the answer not in the manual?
Adjusts the low-pass filter frequency for the subwoofer.
Adjusts the subwoofer's bass frequency level.
Selects automatic or manual power-on for the subwoofer.
Sets the subwoofer's phase to 0° or 180°.
Disconnect power before opening the cabinet to prevent shocks.
Make all connections before plugging in the power cord.
Connect mono LFE/SUB or stereo L/R signals. Crossover active for stereo.
Connect power cord and set the switch to ON.
Replace blown fuse with one of the same type to avoid damage and warranty void.
Subwoofer auto-switches on with signal (green LED) and standby (red LED) after 15 min.
General| Type | Active Subwoofer |
|---|---|
| Phase Switch | Yes |
| Auto On/Off | Yes |
| Crossover Frequency | 40 Hz - 180 Hz |
| Inputs | Speaker In |
To Next Page
