Indie Health 51-1490 User Manual (English)

Questions and Answers:

R
Ruth PooleAug 17, 2025
Why does my Indie Health 51-1490 Blood Pressure Monitor display an abnormal result?
- S
  Stephanie LarsonAug 17, 2025
  An abnormal result on your Indie Health Blood Pressure Monitor may occur due to several reasons. It could be that the cuff was not positioned correctly or was not tight enough; in this case, apply the cuff properly and try taking a new measurement. Also, incorrect body posture during measurement can cause this issue; review the ‘Taking a Measurement’ section and try again. Finally, speaking, excessive movement, or feeling angry, excited, or nervous during measurement can lead to an abnormal result; wait until you are calm, and then attempt a new measurement without speaking or moving.
O
olsonlauraAug 20, 2025
What to do if my Indie Health Blood Pressure Monitor shows E10 or E11 error?
- C
  Claudia WalkerAug 20, 2025
  If your Indie Health Blood Pressure Monitor displays error code E10 or E11, it means the monitor detected motion during the measurement. To resolve this, sit comfortably and remain still, then attempt a new measurement.
J
Jennifer SchmidtAug 22, 2025
Why is the display blank on my Indie Health 51-1490 Blood Pressure Monitor?
- D
  David LeeAug 22, 2025
  If the display of your Indie Health Blood Pressure Monitor is blank when you turn it on, the battery charge is likely low. Recharge the device following the recharging instructions before attempting a new measurement.
D
Dana FitzpatrickAug 26, 2025
How to fix low battery symbol on Indie Health 51-1490?
- K
  kristinahodgeAug 26, 2025
  If you see a low battery symbol and 'Lo' on the display of your Indie Health Blood Pressure Monitor, it indicates that the battery charge is low. You should recharge the device following the recharging instructions and then attempt a new measurement.
S
Shannon McdonaldAug 28, 2025
What does E1 mean on Indie Health 51-1490?
- R
  Rachel RamosAug 28, 2025
  If your Indie Health Blood Pressure Monitor displays 'E1', it means the cuff is not secure. Re-apply the cuff properly and attempt a new measurement.
J
Jessica CarlsonAug 31, 2025
What does E20 error mean on Indie Health Blood Pressure Monitor?
- S
  Samuel Rodgers MDAug 31, 2025
  If your Indie Health Blood Pressure Monitor displays error code E20, it means that the measurement process did not detect a pulse signal. To solve this, re-apply the cuff and attempt a new measurement.
M
Mrs. Heidi JohnsonSep 2, 2025
What does E2 mean on Indie Health 51-1490?
- O
  omuellerSep 2, 2025
  If your Indie Health Blood Pressure Monitor displays 'E2', it indicates that the cuff is too tight. Re-apply the cuff so it is more comfortably fitted, and then attempt a new measurement.
D
David AguirreSep 5, 2025
What does E3 mean on Indie Health 51-1490 Blood Pressure Monitor?
- J
  John JonesSep 5, 2025
  If your Indie Health Blood Pressure Monitor displays 'E3', it means the cuff pressure is in excess. Relax for several minutes, and then attempt a new measurement.
N
nicholsonthomasSep 8, 2025
What does error E21 mean on Indie Health 51-1490 Blood Pressure Monitor?
- N
  Nicholas HernandezSep 8, 2025
  If your Indie Health Blood Pressure Monitor displays the error code 'E21', it means that the unit measured incorrectly. Relax for a moment and then measure again.
D
David JonesSep 12, 2025
What does OUT mean on Indie Health 51-1490?
- F
  frank00Sep 12, 2025
  If your Indie Health Blood Pressure Monitor displays 'OUT', it means the measurement is out of range. Relax for several minutes and attempt a new measurement. If the error persists, consult with your physician.

Indie Health 51-1490 Specifications

General

Brand	Indie Health
Model	51-1490
Category	Blood Pressure Monitor
Language	English

Indie Health 51-1490 User Manual

Table of Contents

Questions and Answers:

Indie Health 51-1490 Specifications