Need help?Do you have a question about the iNECO RGH9028-2 and is the answer not in the manual?
Keep work area clean and well lit, avoid explosive atmospheres, and keep children and bystanders away.
Match plugs to outlets, avoid earthed surfaces, do not expose to rain or wet conditions, and do not abuse the cord.
Stay alert, use personal protective equipment, prevent unintentional starting, maintain balance, and dress properly.
Do not force the tool, use only if switch works, disconnect before adjustments, and store safely out of reach.
Have your power tool serviced by a qualified repair person using only identical parts.
Wear ear protectors, use auxiliary handle, and hold by insulated gripping surfaces.
Machine for hammer drilling in concrete, brick, stone, and drilling without impact in wood, metal, ceramic.
Operate tool with auxiliary handle; adjust position for secure posture.
Set drilling depth using the depth stop and auxiliary handle.
Use SDS-plus tools for hammer drilling/chiselling; others for standard drilling/screwdriving.
Remove and insert the quick change chuck and keyless chuck.
Insert and remove SDS-plus drilling tools into the tool holder.
Observe correct mains voltage before operating the power tool.
Select operating mode using the mode selector switch when machine is off.
Use rotational direction switch to reverse rotation; not possible when On/Off switch is actuated.
Press On/Off switch to start; press and hold lock-on button to lock; release switch to stop.
Adjust speed/impact rate variably by the pressure on the On/Off switch.
Handle tool firmly, switch off if jammed to avoid high reaction torques.
Instructions for changing chiselling position (Vario-Lock).
Keep machine clean, change damaged dust cap immediately, clean tool holder after use.
General| Brand | iNECO |
|---|---|
| Model | RGH9028-2 |
| Category | Rotary Hammer |
| Language | English |
To Next Page