To Next PageTo Next Page
Need help?Do you have a question about the Inepro PayMatic AD2400 and is the answer not in the manual?
Details the physical characteristics and features of the PayMatic® housing and interface.
Explains the two types of PayMatic® available based on coin selector design.
Describes basic operation without ECOS modules, including timing and output modes.
Details advanced capabilities with ECOS modules, including time segments and functions.
Explains how to use the device buttons and key switch for programming.
Lists and briefly describes programmable functions (F0-F4) for settings.
Covers specific settings F5 through FA for various operational parameters.
Details settings FB through FF for counters and automatic time adjustments.
Explains settings P0 through P2 for output configuration and start modes.
Covers settings P3 through P8 for display, time reduction, pause, and payment.
Lists voltage ranges, current consumption, and relay ratings for the device.
Diagram for connecting a 4-pole 20A contactor for higher power applications.
Diagram showing the connection of a solenoid valve to the PayMatic®.
Provides detailed connection layouts for external components and power.
Details the physical characteristics and features of the PayMatic® housing and interface.
Explains the two types of PayMatic® available based on coin selector design.
Describes basic operation without ECOS modules, including timing and output modes.
Details advanced capabilities with ECOS modules, including time segments and functions.
Explains how to use the device buttons and key switch for programming.
Lists and briefly describes programmable functions (F0-F4) for settings.
Covers specific settings F5 through FA for various operational parameters.
Details settings FB through FF for counters and automatic time adjustments.
Explains settings P0 through P2 for output configuration and start modes.
Covers settings P3 through P8 for display, time reduction, pause, and payment.
Lists voltage ranges, current consumption, and relay ratings for the device.
Diagram for connecting a 4-pole 20A contactor for higher power applications.
Diagram showing the connection of a solenoid valve to the PayMatic®.
Provides detailed connection layouts for external components and power.
General| Brand | Inepro |
|---|---|
| Model | PayMatic AD2400 |
| Category | Cash Counters & Coin Sorters |
| Language | English |
