Why is water dripping from my INERGIZE Cold Plunge Tub chiller?
If the water in your INERGIZE Personal Care Products unit is dripping, first ensure that the hose connections are secure, tight, and have O-rings in place. Also, check the water filter housing connection to make sure it's tight and the filter housing O-ring is correctly in place.
How to ensure ozone is off on INERGIZE Personal Care Products?
To ensure the ozone function is off on your INERGIZE Personal Care Products unit, look for the leaf symbol. If ozone is activated and you see the leaf symbol, click on the 'S' button. Then, press and hold the 'W' button until the display shows ‘01’, ‘02’, '03' or ‘00’. Next, click the 'DOWN' button to set the value to '00'. Finally, press the 'S' button to save the changes.
What to do if the water has become cloudy in INERGIZE Cold Plunge Tub Personal Care Products?
To address cloudy water in your INERGIZE Personal Care Products unit, start by checking the filter element and replace it if it appears discolored. If that doesn't solve the problem, add 60cc (2oz) of oxidizer to the water and let it run for 2 hours to break down organics. If the water remains cloudy after these steps, replace the water entirely.
Why are the hose connections leaking on my INERGIZE Personal Care Products?
To fix leaking hose connections on your INERGIZE Personal Care Products chiller, first, check to ensure the gasket is properly in place. If the leak persists, disconnect and then reconnect the chiller hose, making sure it's snug and hand-tight. If the problem continues, replace the hose O-ring with a new one.
How to reset check valve (outlet port) on INERGIZE Cold Plunge Tub Personal Care Products?
If the chiller is trying to prime but no bubbles are coming out from the tub water-in fitting of your INERGIZE Personal Care Products, close the ball valve by rotating it to the closed (perpendicular) position. Remove the outlet chiller hose and position the check outlet port inside the tub to prevent leakage. Check if the check outlet port is stuck in the closed position. If it’s stuck outward, gently press on it using a small screwdriver.
What to do if water is foamy, filter is red, dirty, or clogged after only 3-4 uses in INERGIZE Personal Care Products?
It's likely you need to balance the pH of the water using Sirona Simply Spa Up & Down, and add Sirona Simply Calcium Booster and Metal Control agents to your INERGIZE Personal Care Products unit.
How to troubleshoot water circulation problems in INERGIZE Cold Plunge Tub?
To resolve water circulation issues with your INERGIZE Personal Care Products chiller, first, ensure that the tub fitting valves are in the open (parallel) position, the hoses are correctly connected without any leaks, and the water hoses are straight without loops. Additionally, hand-tighten each of the four hose connections, the strainer housing, the ball valve, and the filter. Check that the water filter and inner water strainer are clean and free of any debris. Inspect the hose O-rings on each end of the hose connection fittings. Remove the lower water filter housing and confirm that the filter housing O-ring in the upper water filter housing (white part) is present and undamaged. Also, ensure the strainer O-ring on the external water strainer is present and not damaged. Finally, drain...
Highlights the risk of drowning and the need for proper supervision of children and anyone using the tub.
Advises specific groups and conditions requiring medical consultation before tub use.
Details electrical safety, GFCI testing, and precautions regarding water and appliances.
Mentions compliance with local laws and safety requirements for pool owners.
Warns about potential chemical exposure, including lead, and directs to P65Warnings.ca.gov.
Explains the functions of buttons like Power, Mode, Setting, Wifi Activation, and arrows.
Details indicators for mode, defrost, system status, compressor, WiFi, ozone, and temperature readings.
Identifies major parts of the chiller unit, including the main unit, drain, outlet, and strainers.
Describes the flexible hoses, their connection fittings, and O-rings for water flow.
Covers the control panel display/buttons and the double-action air pump for inflation.
Details chiller inlet, ball valve, inflation valve, and water filter housing components.
Describes the water filter used within the filter housing for debris removal.
Explains the inflatable tub, its cover, and the locking buckle mechanisms.
Lists items for water care and cleaning, such as oxidizer, test strips, and repair kits.
Guide for unboxing, installing the ball valve, external water strainer, and inflating the tub.
Steps for connecting hoses, filling the tub, opening valves, and powering on the chiller.
Instructions on setting the desired temperature and performing initial water sanitation.
Guidance on how to properly cover the tub and secure its locking buckles.
Instructions for downloading the Tuya Smart app, creating an account, and connecting to WiFi.
Steps for pairing the chiller with the app and confirming a successful connection.
Guide on using the Tuya app to set specific times for chiller operation.
Advice on scheduling the chiller for optimal temperature before and after plunging.
Steps for turning off the chiller, closing the ball valve, and draining the tub water.
Guidance on disconnecting water and inflation hoses, and drying the tub thoroughly.
Instructions for folding and packing the tub, and draining any residual water from the chiller.
Covers initial water treatment with oxidizer and sanitizer, and weekly chemistry testing.
Instructions for checking and cleaning the external water strainer and the water filter.
Details on washing, rinsing, drying, and checking the air pressure of the inflatable tub.
Procedure for descaling the chiller using vinegar and water solution.
Guidelines for cleaning the exterior of the chiller and inspecting the fan area.
Troubleshooting steps for ensuring all connections are secure and water flow is established.
Steps to reset the check valve and unlock trapped air within the chiller system.
Guidance on checking and turning off the ozone feature for optimal performance.
Addresses issues related to leaks from hoses, chiller, and general water dripping.
Covers solutions for cloudy water, foamy water, and poor cooling performance.
Troubleshooting tub deflation, WiFi connectivity, and temperature setpoint problems.
Resolves chiller startup failures, loud operation, and specific error code displays.
Addresses difficulties in packing the tub and issues with gradual deflation.
The Inergize Cold Plunge Tub is a recreational cold or hot tub designed for personal use, featuring a chiller unit that regulates water temperature, circulates water, and filters it. The system includes an inflatable tub, a chiller, hoses, and various accessories for setup, maintenance, and operation.
The Inergize Cold Plunge Tub allows users to experience cold water immersion or hot tub relaxation. The chiller unit is the main component responsible for chilling or heating the water, circulating it through the tub, and filtering out debris. The system is designed for ease of setup and takedown, making it suitable for both permanent and temporary installations. The tub is inflatable, providing portability and convenience. A control panel on the chiller allows users to set the desired temperature, monitor system status, and activate various functions like Wi-Fi connectivity and ozone generation. The system also integrates with a mobile app (Tuya Smart) for remote control and scheduling.
The manual lists available accessories, including Filters, Oxidizer, Sanitizer, Test Strips, Calcium Booster, Metal Control, Spa Up, Spa Down, Sump Pump, and Breathable Tiles.
General| Brand | INERGIZE |
|---|---|
| Model | Cold Plunge Tub |
| Category | Personal Care Products |
| Language | English |
To Next Page