Infasecure CS8113 - Page 2

Customer Care:
AU: 1300 92 4632
NZ: +61 2 4728 8090
customercare@infa.com.au
7.
8.
9.
10.
11.
12.
13.
Once loose under the seat, push back
up through the last slot to completely
disconnect buckle from seat. Put aside
for disposal.
Take the new replacement buckle.
Under the fabric and foam flap, there are
three holes.
Take the adjustable buckle plate and push
the plate down through the right outside
hole.
On the underside of the seat, move the
harness adjuster strap out of the way and
then thread the adjustable buckle plate up
through the centre hole.
Now take the buckle plate and thread down
through the other outside hole.
Take the screw and reattach through the
botttom hole in the Buckle plate, to secure
it to the restraint.
The restraints harness buckle replacements
has now been completed.
110-114 Old Bathurst Road, Emu Plains NSW 2750.
www.infasecure.com.au
Buckle Strap
Buckle
Buckle Plate
has
now
been
complet
ed
d,
Em
u
P
la
in
s
N
S
W 27
50.
The buckle orientation
should be as seen in the
image on the left.
CS8113, CS9213
HARNESS BUCKLE REPLACEMENT
Adjustable
Buckle Plate