6
GB
Leak testing (to be performed in a well-
ventilated area)
Your Outdoor Patio Heater has been
checked for leaks at all the factory made
connections. To check the connection of the
gas hose/regulator/LPG cylinder.
1) Make leak test solution by mixing 1 part
washing up liquid and 3 parts water.
2) Spoon several drops (or use squirt bottle)
of the solution onto the gas hose/regulator
and regulator/LPG cylinder connection.
3) Inspect the connections and look for
bubbles.
4) If no bubbles appear, the connection is
safe.
If bubbles appear, there is leak, loosen and
re-tighten this connection. Repeat the test.
If bubbles form again, stop trying; contact
your local dealer for assistance.
Leak test annually, and whenever the gas
cylinder is removed or replaced.
Note: In the event of gas leakage, the appli-
ance must not be used or if already alight,
the gas supply must be shut off and the
appliance investigated and rectified before it
is used again.
To Next Page
Loading...
