Need help?Do you have a question about the Infinera TM-3000 and is the answer not in the manual?
Describes DC and AC power options, including DC/DC modules and AC/DC converters.
Details the TM-3000 card cage, slot types, and configuration possibilities.
Details DC-filter types and their impact on card cage power limits.
Explains how AC/DC converter choices must match DC-filter capabilities.
Lists fan units needed for high power density and high bit rate traffic units.
Describes card slot categories and usage guidelines for the chassis.
Lists supported plug-in units and their slot positions.
Clarifies compatibility between Control Unit versions and HW/SW objects.
Details compatibility between CU versions, supported HW, and chassis.
Provides information on ordering TM-3000 chassis and related components.
Details a 40x 10GbE configuration using the TM-3000 chassis.
Describes an 80x 10Gb/s configuration spanning two TM-3000 chassis.
General| Dimensions | 17.2" (43.7 cm) H x 17.4" (44.2 cm) W x 22.0" (55.9 cm) D |
|---|---|
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) |
| Form Factor | Rack-mountable |
| Power Supply | Dual, hot-swappable |
| Cooling | Redundant, hot-swappable fan trays with variable speed control |
| Relative Humidity | 5% to 95% non-condensing |
To Next Page
