Infinite IT- 8500 Series User Manual

A. Attaching the Armrests
A1. Remove the main body of the massage chair from its packaging.
Locate the two armrests and remove all plastic covering.
A2. Locate the three holes (circled in red in the picture) at the base of the left armrest, attached to
the chair.
---------------------------------------------------------------------------------------------------------------------------------------------
MASSAGE CHAIR ASSEMBLY
Main body
Armrest
* Although there is a hole, please
disregard the one circled in black.
A3. Look in the carton to locate the three identical screws depicted here:
A4.
(top view) (inverse view) (side view)
IT- 8500 Series Installation Guide
Fit the three screws mentioned in step A3 into the three holes mentioned in step A2. Be sure
the screw is positioned with the + & - at the top so that the screw is positioned exactly as shown
in the illustration.

Infinite IT- 8500 Series Specifications

General

Model	IT-8500 Series
Remote Control	Yes
Portable	No
Massage Type	Shiatsu, Kneading, Rolling
Features	Zero Gravity
Power Source	AC Power Adapter

Summary

Attaching the Armrests

Prepare Armrests and Main Body

Remove main body and armrests from packaging, then remove plastic covering.

Identify Armrest Mounting Holes

Locate three specific holes at the base of the left armrest attached to the chair.

Locate Attachment Screws

Find the three identical screws required for armrest attachment.

Insert Screws into Armrest Holes

Insert screws into designated holes, ensuring correct orientation of the screw head.

Align Armrest Bolts with Chair

Align partially inserted bolts on the armrest with chair holes, but do not fully seat the armrest yet.

Connect Armrest Air Hoses

Connect air hoses to chair connectors, ensuring a secure fit and managing slack to prevent kinking.

Secure Armrest to Chair Body

Align the three bolts with the previously identified holes and attach the armrest to the chair body.

Verify and Tighten Armrest Assembly

Confirm armrest assembly and secure by rotating the screw 90° clockwise.

Attach Right Armrest

Repeat the entire armrest attachment process for the right armrest.

Assembling the Legrest

Prepare the Legrest

Remove the legrest from its packaging and open it.

Position and Connect Legrest Cables

Place the legrest before the main chair body, connecting the cable and air hose to their respective slots.

Secure Legrest to Chair Frame

Use hex screws to fasten the legrest to the chair body at the top right and left bolting points.

Connect Left Backrest Air Hoses

Connect the three numbered air hoses (5, 6, 11) in the back left of the backrest.

Connect Right Backrest Air and Power

Connect the air hose (12) and power cable in the back right of the backrest.

Attach Seat and Back Cushions

Attach remaining parts like seat, back, and head cushions to the main chair body.

Connecting the Speakers

Unpack Speakers

Find and unpack the massage chair speakers.

Identify Speaker and Massager Labels

Identify left (L) and right (R) labels on speakers and shoulder massagers.

Connect Speaker Wire to Chair

Connect the white speaker connector on the speaker to the corresponding white connector on the chair.

Insert Shoulder Massager Pins

Insert three joint pins from the shoulder massager and speaker into the connecting tubes in the backrest.

Secure Speaker/Massager Connection

Secure the connection by moving a slider to expose a locking screw, tightening it, and then returning the slider.

Assemble Controller and Stand

Assemble the massage chair's controller and its supporting stand.

Power Up Massage Chair

Plug the chair into a power outlet and turn it on to begin use.