To Next PageTo Next Page
Need help?Do you have a question about the Infiniti G35 2003 and is the answer not in the manual?
General| Brand | Infiniti |
|---|---|
| Model | G35 2003 |
| Category | Automobile |
| Language | English |
Summarizes important precautions for disassembling and servicing drive shafts.
Details Kent-Moore special service tools for vehicle maintenance and repair.
Lists common power tools used for various automotive service tasks.
A chart to help diagnose and identify causes of noise, vibration, and harshness issues.
Procedures for inspecting wheel hub components while installed on the vehicle.
Guidelines for inspecting wheel bearings for looseness, noise, and proper operation.
Step-by-step instructions for removing and installing the wheel hub assembly.
Checks for suspension arm ball joint condition after component removal.
General guidance for installing components, referring to removal procedures.
Detailed steps for taking apart and putting back together the wheel hub assembly.
Instructions for removing and installing bushings associated with the wheel hub.
Procedures to inspect wheel hub, axle, and back plate after disassembly.
Steps for reassembling the wheel hub components, including wheel bearing and anchor block.
Final checks on wheel bearing rotating torque after assembly.
Procedures for removing and installing the rear drive shaft assembly.
Checks for joint movement, looseness, boot damage, and grease leakage after removal.
Guidance for installing the rear drive shaft, referring to removal steps.
Comprehensive steps for disassembling and reassembling the rear drive shaft.
Provides specifications for wheel bearing axial end play, rotational torque, and spring scale.
Lists specifications for drive shaft joint type, grease quantity, and boot length.
Specifies torque values for drive shaft and hub lock nut.
