What to do if my Infiniton GASDL4 Hob smells of gas?
If your Infiniton Hob smells of gas, immediately turn it off, close the gas valve, and open the windows to ventilate the room. This is likely due to a gas leak, and you should contact the official technical service for assistance.
What to do if the flame goes out during use on my Infiniton GASDL4 Hob?
If the flame goes out during use on your Infiniton Hob, this could be due to several reasons. First, the burners may be dirty, so clean them properly. Alternatively, liquid might have spilled on the flame; if so, turn the cooker off, wait a minute, and turn it back on. A strong draught could also extinguish the flame; in that case, turn the hob off, check for draughts, wait a minute, and then turn it back on.
Why my Infiniton GASDL4 Hob does not light?
If your Infiniton Hob does not light, make sure that the gas valve is open. Also, check that the burner cap is correctly assembled. Ensure that the hob is connected to the mains and switched on, and verify there isn't a power cut in your home or area.
Why does the Infiniton GASDL4 have an irregular flame?
An irregular flame on your Infiniton Hob could be due to a few issues. Ensure that the gas valve is open and that the burner cap is correctly assembled. Also, check for any food residue obstructing the flame outlet and clean it with a dry cloth. If the burners are wet, dry them with a soft, dry cloth.
Why is the flame yellow on my Infiniton GASDL4?
If the flame on your Infiniton Hob is yellow, it could be because the flame diffuser orifices are clogged, so clean the flame diffuser. It may also be caused by using a different type of gas, so check the type of gas you are using.
How to fix an unstable flame on an Infiniton Hob?
If your Infiniton Hob's flame is unstable, the burner cap may be incorrectly assembled. Make sure to mount the burner cap correctly.
Why is there noise when the flame burns and ignites on my Infiniton GASDL4 Hob?
If there is noise when the flame burns and ignites on your Infiniton Hob, it is likely that the burner cover is incorrectly assembled. Make sure to assemble the cover correctly.
Why does the flame go out during use on my Infiniton GASDL4?
If the flame goes out during use on your Infiniton Hob, it could be due to dirty burners, liquid spillage, or a strong draught. Properly clean the burners. Turn the cooker off, wait one minute, and then turn it back on. Also, turn the hob off and check for any draughts affecting it, then wait one minute before turning it back on.
Why is the flame on my Infiniton GASDL4 Hob irregular?
An irregular flame on your Infiniton Hob may be due to a closed gas valve, an incorrectly assembled burner cap, food residue obstructing the flame outlet, or wet burners. Ensure the gas valve is open, the burner cap is correctly assembled. Clean any food debris with a dry cloth, and dry the burner feet with a soft, dry cloth.
How to fix Infiniton Hob that does not light?
If the Infiniton Hob does not light, make sure it's connected to the mains and switched on. Check for power cuts. Ensure the burner cap is correctly assembled and that the gas valve is open.
To Next Page
General