Infiniton GASDL4 - Page 38

inniton.es40
English
Maintenance & Cleaning
1. Place the ame diffuser (4) on the burner (5), so that the ignition equipment and the ame control
equipment are inserted into their respective holes. The ame diffuser must t correctly.
2. Place the burner cover (1,2,3) over the ame diffuser (4), so that they t into their respective holes.
3. Place the parts in the correct order after cleaning.
4. The parts must t perfectly.
General cleaning
• Cleaning should only be carried out when the product is completely cool.
• The product must be disconnected from the mains before cleaning.
• Clean the product regularly, preferably after each use.
• Abrasive cleaners or sharp objects may damage the surface of the product.
• Cleaning should be carried out with water and a little liquid.
Cooking grate and control knobs
• Remove the grill from the hob
• Clean with a damp cloth
• Dry with a soft dry cloth
Hob surface
• Clean the surface of the hob using a soft, well-wrung cloth.
• Dry the surface thoroughly after cleaning.
• Remove food or liquids from the burners as soon as possible to avoid the risk of corrosion.
• The stainless steel parts of the product may discolour. This is normal due to high temperatures. Whe-
never you use the appliance, clean these parts with a product suitable for stainless steel.
Burners
• All burner elements can be removed for cleaning.
• Wash the burner elements with hot soapy water and remove marks with a mild cleaning paste.
• If the marks are difcult to remove, a nickel sponge well soaked in soap can be carefully used.
• After cleaning, be sure to dry with a soft cloth.
Ret the auxiliary, semi-fast, fast and triple crown burners as follows:
2
1
2
3
3
4
4
5
7
6
6
7
5