Infiniton GASHQ4 - Instructions for the Installer

8
Instructions for the Installer
Overall dimensions
Width: 590mm Depth: 510mm (for model:HQ4B60A*GIK,HQ4B67A*GIK)
Width: 580mm Depth: 500mm (for model:HQ4B60B*GIK, HQ4B60B*GIK(Q),HQ4B60C*GIK,HQ4B64A*GIK,
HQ4B64A*GIK(Q))
Width: 645mm Depth: 525mm (for model:HQ4L67AAGIK)
Width: 610mm Depth: 525mm (for model:HQ4L60A*GIK,HQ4L64A*GIK,HQ4L67ABGIK,HQ3L60A*GIK,
HQ3L64A*GIK)
Width: 860mm Depth: 500mm (for model:HQ5B90AAGIK,HQ5B90BAGIK,HQ5B90CAGIK,HQ5L90AAGIK,
HQ5L90BAGIK,HQ5L90CAGIK,)
Cut out dimensions
Width: 555mm Depth: 475mm
Width: 835mm Depth: 475mm
Technical Data
Burner configuration
NG
LPG
Injector Dia. (mm)
kW
Injector Dia. (mm)
kW
Gas category
I2H(20)
I2H(20)
I3B/P(30)/ I3+
I3B/P(30)/ I3+
Wok burner(double rings burner)
1.33
3.5
0.93
3.5 (255g/h)
Rapid burner
1.28
3.0
0.85
3.0 (218g/h)
Semi rapid burner
0.97
1.75
0.65
1.75 (127g/h)
Auxiliary burner
0.72
1.0
0.5
1.0 (73g/h)
Different models have different total heat input,please refer to page 1& page 2
Gas category
I Category
I
3+（28~30/37）
BE, FR, IT, LU, LV, IE, GB, GR, PT, ES, CY, CZ, LT, SK, CH, SI
I
3B/P(30)
LU, NL, DK, FI, SE, CY, CZ, EE, LT, LV, MT, SK, SI, BG, IS, NO, TR, HR, RO, IT, HU
I
2H(20)
FR, IT, BE, NL, DK, IE, GB, GR, ES, PT, AT, FI, SE CZ, EE, HU, LV, LT, SK, SI, IS, NO, CH, TR,
BG, HR and RO.
Note: when injectors are changed, the new one should be marked by the gas technician.
Injectors should always be changed by the authrized person.
Gas Type and working pressure:
I2H(20):G20 at 20 mbar.
I3B/P(30):G30,G31 or their mixtures at (28-30)mbar.
I3+(28-30/37):G30 at (28-30) mbar,G31 at 37mbar.