EasyManua.ls Logo

Infiniton IMW-20BTN - Instrucciones de Instalacion; Installation Instructions

Infiniton IMW-20BTN
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation Instructions
Please Read the Manual Carefully Before Installation
Please Note
Electrical connection
The oven is fitted with a plug and must be only connected to a properly installed earthed
socket. In accordance with the appropriate regulations, the socket must only be installed
and
the connecting cable must only be replaced by a qualified electrician.
If the plug is no longer accessible following installation and all-pole isolating switch
mus
t
be present ton the installation side with a contact gap of at least 3mm.
INSTRUCCIONES DE INSTALACION
Por favor lea atentamente el libro antes de la instalación.
NOTA IMPORTANTE
El microondas viene con un enchufe macho que debe ser enchufado en bases
de enchufe con conexión a tierra. En cumplimiento de la normativa vigente, tanto
la conexión eléctrica como la sustitución del cable sólo puede ser llevado a cabo
por un técnico especializado.
Conexión Eléctrica
A. Built-in furniture
The built-in cabinet shall not have a rear wall behind the appliance.
Minimum installation height is 85cm.
Do not cover ventilation slots and air intake points.
No tape las salidas de ventilación del aparato ni los otros puntos de entrada de
aire.
mínima
La altura
para la instalación es de 85 cm.
Hueco de encastre
El hueco para la instalación no debe tener una pared detrás.
Nota:
no atrape ni retuerza el cable.
380+2
A. H ueco d e encastre
ES-22

Other manuals for Infiniton IMW-20BTN

Related product manuals