Infiniton IMW-WGL52 - Page 36

35 inniton.es
English
How to use
Order Display Microwave power GRILL Power
1 P100 100%
2 P80 80%
3 P50 50%
4 P30 30%
5 P10 10%
6 G 0% 100%
7 C-1 55% 45%
8 C-2 36% 64%
2. Start coocking
1. Press the “Micro./Grill/Combi” button once and “P100” will be displayed.
2. Press the “Micro./Grill/Combi” button several times or press +/- to select the microwave power be-
tween 100% and 10%. P100”, ‘P80’, ‘P50’, ‘P30’ and ‘P10’ will be displayed successively.
3. Press the “Start” button to conrm the selection.
4. Press +/- to set the cooking time (the time is between 0:05 and 95:00).
5. Press the “Start” button to start cooking.
Note:
The step quantities for the setting time of the programming selector are as follows:
0---1 min: 5 seconds
1---5 min: 10 seconds
5---10 min: 30 seconds
10---30 min: 1 minute
30---95 min: 5 minutes
Microwave power on the display:
2. GRILL / COMBI
Press “MICRO / GRILL / COMBI” once the LED shows “P100”, “MICRO / GRILL / COMBI”. C-1” or ‘C-2’ will
appear. Then press “ Start ” to conrm and set the cooking time from 0:05 to 95:00. Press “ Start ” again
to start cooking.
Example: if you want to use 55% microwave power and 45% grill power (C-1) to cook for 10 minutes, you
can use the microwave by following the steps below:
1) Press “MICRO / GRILL / COMBI” once, and the display will show “P100”.
2) Continue to press “MICRO / GRILL / COMBI” until the display will show “C-1”.
3) Press “ Start ” to conrm.
4) Press “+ or -” to adjust the cooking time until the microwave displays “10:00”.
5) Press “ Start ” to start cooking.
Note: If half of the gratin time elapses, the oven beeps twice, which is normal. To achieve a better gratin
effect, you should turn the food over, close the door and press “ START ” to continue cooking. If you do not
succeed, the microwave will continue to operate.