Infiniton PACPX45AW - Exhaust Pipe Connection Steps

33 inniton.es
English
Installation
RIGHT INSTALLATION
WRONG INSTALLATION
Prevent the duct from bending sharply, ensuring that air can ow smoothly through the duct. This duct is
designed solely and exclusively for this model, please do not replace it with a non-Inniton duct.
Step 3:
Turn the exhaust pipe assembly (exhaust tting end) into the rear panel
outlet (counterclockwise).
Make sure that the parts t snugly.
Do not force the connections, as this may damage parts of the unit and
the corrugated pipe.
Any damage caused by improper pipe connection is exempt from
warranty.
Step 4:
Insert the exhaust pipe assembly
(exhaust port end) into the window seal
panel assembly and secure with either
a screw or clip.
The corrugated tube can be stretched
up to 1500mm. To avoid bending it,
make it as short as possible.
Plate’s hole
Fix
Corrugated
pipe
Plate