8
Step 4:
To ensure safety and reduce noise, you should install the transportation bolt
cover supplied with the unit (see the annex accompanying the unit). Lean and
place the transportation bolt into hole and press it following the shown direction
until it clicks.
lmportant: Keep the transportation bolt for future transporting of the
appliance and in this case refit the transportation bolts in reverse order.
12.4 Adjusting the feet
Step 1:
Step 2:
Slacken the locknut clockwise (see arrow) using the wrench.
Lift the machine slightly and adjust the height of the foot by revolving it.
To Next Page
Loading...
