28
The drain hose is frozen up.
Plug in the appliance again. lf the fault persists, unplug the appliance and contact
After-Sales Service(see "After-Sales Service" ).
fig.2
Electron
ic module fails(F05, F04,F23,F07,F06). (fig.3,fig.4,fig.5,fig.6,fig.7)
Electronic module fails.
Turn the programme selector knob on position "OFF" for 3 seconds to turn off the
machine and select the desired programme; if the fault persists,unplug the appliance
and contact After-Sales Service (see "After-Sales Service").
fig.3 Abnormal temperature sensor
fig.4 Abnormal water heater
fig.5 Abnormal water level sensor
fig.6 motor error
fig.7 motor speed error
To Next Page
Loading...
