10
12
OPERATIONS
Before washing, please make sure it’s installed properly.
Before washing at first time, the washing machine shall be operated in one
of the whole procedures without clothes in as follows.
•
•
round
1. Before Washing
Open tap
Load
Close door
Plug in
Add detergent
Quick Start
• Detergent need to be added in "case I “after selecting pre-washing for machines
with this function.
1 2 3 4 5
2. Washing
Power On
Select Programme
Select function or
default
Start up
1 2 3 4
Note!
Caution!
Main
wash
Prewash
Softener
It’s recommend to calibrate the wash machine so that can serve you better.
1- Empty the wash machine;
2- Plug in;
3- Power on the wash machine and press “Speed” and “Delay” at the same time
within 10 seconds then display “t19”
4- Press to start the wash machine and wait till display “****”
Calibration
To Next Page
Loading...
