6
Step 1: Unpacking (Kit contents)
Unpack the contents of the shipping carton carefully. We recommend that
you identify the items listed below before discarding the packing material.
You may also have additional accessories inserted in the box, such as an
extra rechargeable battery, speaker/microphone, ear mic., PC Program-
ming Software CD, PC programming cable, etc., depending on your or-
der.
If any damage has occurred during shipment, contact the Carrier.
If there are any missing parts, please contact the Re-Seller immediately.
Parts List
Gain Flex Antenna
Rapid
Battery
Charger
AC
Adapter
2 Way Radio
Transceiver Rechargeable
Lo-Poly Battery
STEP 2. Transceiver Preparation Before Use.
>NOTE: The factory does not charge the battery before shipping.
Follow all instructions precisely.
2.1 Insert the supplied rubber washer onto the an-
tenna connector before attaching the antenna.
Screw the supplied antenna with the SMA female
connector onto the mating top connector of the
transceiver by holding the radio with one hand and
then grasping the base of the antenna with the other,
then turning the antenna clockwise until secure.
DO NOT OVER TIGHTEN! The antenna should be snug.
Radio mounted
belt clip, 2 screws
To Next Page
Loading...
