Black plate (126,1)
Model "INFINITI_NAVI" EDITED: 2006/ 3/ 20
SETTING A FACILITY AS THE DESTINA-
TION
When you are setting the destination to a
facility, the following methods are avail-
able.
. Setting a Point of Interest
This allows you to find a facility by
type, and then have the system calcu-
late a route to that destination. Specify
the region and city of the destination to
find it more quickly.
. Setting a Freeway Entrance/Exit
This allows you to set the destination to
an entrance or exit of a freeway, and
then have the system calculate a route.
. Setting by Phone Number
If you know the telephone number of
the facility, use this to find the facility
by entering the number, and then have
the system calculate a route.
. Setting a Nearby Place
This allows you to set the destination to
a facility located near the current
vehicle location or another location
that you move to by scrolling the
map, and then have the system calcu-
late a route.
If ther e is any parti cular Points of
Interest type that you intend to use
frequently, you can store it in the list of
nearby Points of Interest.
“CUSTOMIZING NEARBY PLACES”
(page 6-36)
4. Setting a destination
4-32
To Next Page
Loading...