Infinity NV29 - Emptying the Dust Cup Assembly; Procedure for Emptying

10 TOLL FREE: 1-888-668-9600
3
4
2
1
Emptying the Dust Cup Assembly
To empty the Dust Cup Assembly:
1 Grip carry handle and press the Dust
Cup release button to remove Dust
Cup Assembly.
2 Insert Dust Cup Assembly deep
inside trash receptacle to contain
dust and debris.
Press the Dust Cup Door release
button; tap container gently to
dislodge and release dust and
debris.
3 Snap door in place.
4 Position Dust Cup Assembly at a
forward angle over unit and then
snap into place.
For best results empty the Dust Cup
Assembly after each use; empty several
times during prolonged usage.
Or empty the Dust Cup Assembly when
it reaches the MAX fill line; NEVER
OVER-FILL THE DUST CUP.
Lock vacuum into upright position.
Turn vacuum off.
CAUTION:
Unplug the vacuum;
failure to do so
Might result in
electric shock.