[ Edit: 2016/ 6/ 21 Model: 2017MY INFINITI Q50(V37) OM17E00V37U0 ]
5-72 Starting and driving
—
Severe weather
—
Road spray
—
Ice/frost/dirt build up on the vehicle
. Do not attach stickers (including trans-
parent material), install accessories or
apply additional paint near the radar
sensors. These conditions may reduce
the ability of the radar sensors to detect
other vehicles.
. The sonar sensors detect stationary
objects behind the vehicle. The sonar
sensor may not detect:
—
Small or moving objects
—
Wedge-shaped objects
—
Object close to the bumper (less
than approximately 1 ft (30 cm))
—
Thin objects such as rope, wire and
chain, etc.
. The brake engagement by the BCI
system is not as effective on a slope as
it is on flat ground. When on a steep
slope the system may not function
properly.
. Do not use the BCI system under the
following conditions because the system
may not function properly.
—
When driving with a tire that is not
within normal tire conditions (for
example, tire wear, low tire pressure,
installation of spare tire, tire chains,
non-standard wheels).
—
When the vehicle is equipped with
non-original brake parts or suspen-
sion parts.
. Excessive noise (for example, audio
system volume, open vehicle window)
will interfere with the chime sound, and
it may not be heard.
JVS0614X
*
1
Vehicle information display
SYSTEM TEMPORARILY UNAVAIL-
ABLE
GUID-9097D361-3A48-4CE5-8725-42F39CE304C2
If the following message appears in the
vehicle information display
*
1
, a chime
will sound and the BCI system will be
turned off automatically.
. “Unavailable High Accelerator Temp.”:
If the vehicle is parked in direct sun-
light under high temperature condi-
tions (over approximately 104 8F (40
8C)) and then started, the BCI system
may be deactivated automatically.
Condition: