[ Edit: 2016/ 6/ 21 Model: 2017MY INFINITI Q50(V37) OM17E00V37U0 ]
Action to take:
When the interior temperature is re-
duced, turn off the BCI system and turn
it on again.
. “Unavailable Side Radar Obstruction”:
When side radar blockage is detected.
Action to take:
When the blockage is removed, turn off
the BCI system and turn it on again.
SYSTEM MALFUNCTION
GUID-9E7F9DDD-72EE-4D00-ACF3-2C5833AFDB5B
If the BCI system malfunctions, it will turn
off automatically, a chime will sound and
BCI system “malfunction” warning mes-
sage will appear in the vehicle information
display
*
1
.
Action to take:
Stop the vehicle in a safe location and
place the shift lever in the P (Park) position.
Turn the engine off and restart the engine.
If the warning message continues to
appear, have the system checked. It is
recommended you visit an INFINITI retailer
for this service.
JVS0489X
SYSTEM MAINTENANCE
GUID-AACA1D4C-69A2-4715-A2D4-FD0D6E2D4DC8
The two radar sensors
*
1
for the BCI
system is located near the rear bumper.
Always keep the area near the radar
sensors clean.
The radar sensors may be blocked by
temporary ambient conditions such as
splashing water, mist or fog.
The blocked condition may also be caused
by objects such as ice, frost or dirt
obstructing the radar sensors.
Check for and remove objects obstructing
the area around the radar sensors.
Do not attach stickers (including transpar-
ent material), install accessories or apply
additional paint near the radar sensors.
Do not strike or damage the area around
the radar sensors.
It is recommended you visit an INFINITI
retailer if the area around the radar
sensors is damaged due to a collision.
Radio frequency statement
GUID-CB92F1EF-257C-4E49-B4AD-0689AD4B9EF7
For USA
This device complies with part 15 of the
FCC Rules.
Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device
must accept any interference received,
including interference that may cause
undesired operation.
NOTE:
The manufacturer is not responsible for
any radio or TV interference caused by
unauthorized modifications to this equip-
ment. Such modifications could void the
user’s authority to operate the equipment.
For Canada
This device complies with Industry Canada
Standard RSS-310.
Starting and driving 5-73
Condition:
To Next Page
Loading...