[ Edit: 2016/ 8/ 1 Model: 2017MY INFINITI Q70(Y51) OM17E00Y51U0 ]
JVH1303X
Sonar function settings
GUID-E4326C3E-4C21-4192-B7E3-C8B3D5FC8AAA
To set up the sonar function to your
preferred settings, push the SETTING
button, select the “Others” key and then
select the “Camera” key on the center
display.
Designs and items displayed on the screen
may vary depending on the models.
Sonar:
When this item is turned ON, the front and
rear sonar is activated. When this item is
turned to OFF (indicator turns off), the front
and rear sonar is deactivated. The amber
markers are displayed at the corners of the
vehicle icon and the sonar icon will
disappear from the
. The next time the
ignition switch is placed in the “ON”
position, “Sonar is OFF” is displayed
briefly.
Towing Mode:
When this item is turned ON, only the rear
sonar is OFF. The amber markers are
displayed at the rear corners of the vehicle
icon.
Show Camera when Sonar Activate:
When this item is turned ON, the camera
view is automatically shown on the display
in the case that the distance to the objects
measured by the sonar is becoming short.
Sonar Sensitivity:
Adjust the sensitivity level of the sonar
higher (right) or lower (left).
SONAR SYSTEM LIMITATIONS
GUID-115E9BFB-2619-4178-8A14-F0158973253B
WARNING
Listed below are the system limitations for
the sonar function. Failure to operate the
vehicle in accordance with these system
limitations could result in serious injury or
death.
. Inclement weather or ultrasonic sources
such as an automatic car wash, a truck’s
compressed-air brakes or a pneumatic
drill may affect the function of the
system, including reduced performance
or a false activation.
. The system is not designed to prevent
contact with small or moving objects.
. The system will not detect small objects
below the bumper, and may not detect
objects close to the bumper or on the
ground.
. The system may not detect the following
objects:
—
Fluffy objects such as snow, cloth,
cotton, grass or wool.
—
Thin objects such as rope, wire or
chain.
—
Wedge-shaped objects.
. If your vehicle sustains damage to the
bumper fascia, leaving it misaligned or
bent, the sensing zone may be altered
causing inaccurate measurement of ob-
jects or false alarms.
Monitor, climate, audio, phone and voice recognition systems 4-49
Condition:
To Next Page
Loading...
