[ Edit: 2016/ 8/ 1 Model: 2017MY INFINITI Q70(Y51) OM17E00Y51U0 ]
You can call the identified number using
the following command: “Dial” followed by
the voice tag.
Dialling a name with a voice tag:
Y51D-V-E01-9D8CB807-639A-4876-9716-49209FF89C0C
It is possible to call up a name via a voice
tag instead of a number, provided the
name and number of your correspondent
has been previously stored in the phone-
book.
Dial via a voice tag, according to the
following procedure.
1. Push the
button.
2. The system replies “please say a
command after the beep. Available
commands are: Call, Phonebook, Re-
cent Calls, Connect Phone or Help”.
3. Give your instructions to the system by
saying: “Dial John” for example (“John”
must have been previously set as a
voice tag for John’s phone number) or
“Dial One” if John is classified as one in
the phonebook.
If the system cannot understand your
command, repeat it according to the
recommendations mentioned in “How
to speak commands” (P.4-112).
4. If the given name (voice tag) is correct,
the phone system will dial the number
registered for “John”.
INFO
To end the voice command phase at any
stage of the procedure, push the
button once in order to activate the cancel
command.
Manual command selection:
Y51D-V-E01-0309E0C6-C82E-4D77-B812-1AC105377704
Commands can be selected manually.
While the commands are displayed on the
screen, select a command by operating the
Tune switch, and then push the
button.
Once a command is manually selected, the
voice command function is cancelled. To
return to voice command mode, push the
button to cancel the current operation,
and then perform the first procedure of
voice command.
Monitor, climate, audio, phone and voice recognition systems 4-113
Condition:
To Next Page
Loading...
