[ Edit: 2016/ 8/ 1 Model: 2017MY INFINITI Q70(Y51) OM17E00Y51U0 ]
4-112 Monitor, climate, audio, phone and voice recognition systems
command recognition mode .
4. The system acknowledges the com-
mand and announces the next set of
available commands.
5. After the tone sounds, speak the phone
number.
6. When you have finished speaking the
phone number, the system repeats it
back and announces the available
commands.
7. After system responds, speak “Dial”
and the system dials the spoken
numbers.
Operating tips:
Y51D-V-E01-1EF626DB-184F-4834-A7C1-74FD48B98B91
. Voice commands cannot be accepted
when the icon is
.
. If the command is not recognized, the
system announces, “Please say again”.
Repeat the command in a clear voice.
. Push the
button or the BACK button
once to return to the previous screen.
. If you want to cancel the command,
push the
switch. The message
“Voice input is canceled” will be
announced. If you want to adjust the
volume of the system feedback, push
the volume control buttons [+] or [−] on
the steering wheel or use the audio
system volume knob while the system
is making an announcement.
Voice Prompt Interrupt:
GUID-94A43A09-FB1E-4CDF-80D3-7B49E884699E
While using the voice recognition system,
the system voice can be interrupted to
allow the user to speak commands. While
the system is speaking, push the
button on the steering wheel. The system
voice will stop and a tone will be heard.
After the tone, speak desired command
(displayed on the touch-screen).
One Shot Call:
GUID-AC9CB439-7789-4EBD-876E-280FB5DAC019
To use the system faster, you may speak
the second level commands with the main
menu command on the main menu. For
example, push the
button and after the
tone say, “Call Redial”.
How to speak commands:
Y51D-V-E01-29E9A3E4-15BA-44F7-93A8-C1D55DFB6540
The Voice Recognition System requires a
certain way to speak voice commands.
Speak normally and clearly in the direction
of the microphone (located in front of the
RearView mirror). Every digit of the number
must be spoken individually and in a
normal manner. The hands-free mode will
work best when the telephone number is
spoken in blocks of three to five digits.
After each spoken block is terminated, the
system will repeat the three to five digits
and wait for you to speak the next digit or
block of digits required for the telephone
number.
See “List of voice commands” (P.4-114) for
the appropriate commands that can be
spoken for the hands-free mode system.
Example:
In order to initiate a call, speak “Phone-
book”.
INFO
. If you are controlling the telephone
system by voice command for the first
time or do not know the appropriate
voice command, speak “Help”. The
system announces the available com-
mands.
. When you speak numbers, you can
speak both “zero” or “oh” for “0”.
Personal vocabulary (voicetags):
Y51D-V-E01-F8386A90-F7F1-4331-A3AA-B743C504B777
Voice Recognition System is equipped with
the function called “voicetags”, which can
be associated with the phone number and
name in the phonebook. Using the voice
tag will automatically generate a speed
dial to the registered number.
See “Phonebook registration” (P.4-116).
Condition:
To Next Page
Loading...
