[ Edit: 2016/ 8/ 1 Model: 2017MY INFINITI Q70(Y51) OM17E00Y51U0 ]
5-50 Starting and driving
covered with water, dirt, snow, etc.
—
On roads where discontinued lane
markers are still detectable.
—
On roads where there are sharp
curves.
—
On roads where there are sharply
contrasting objects, such as sha-
dows, snow, water, wheel ruts,
seams or lines remaining after road
repairs.
—
On roads where the traveling lane
merges or separates.
—
When the vehicle’s traveling direc-
tion does not align with the lane
markers.
—
When traveling close to the vehicle
in front of you, which obstructs the
lane camera unit detection range.
—
When rain, snow or dirt adheres to
the windshield in front of a lane
camera unit.
—
When the headlights are not bright
due to dirt on the lens or if aiming is
not adjusted properly.
—
When strong light enters a lane
camera unit. (For example: light
directly shines on the front of the
vehicle at sunrise or sunset.)
—
When a sudden change in bright-
ness occurs. (For example: when the
vehicle enters or exits a tunnel or
under a bridge.)
. Do not use the BSI system under the
following conditions because the system
may not function properly.
—
During bad weather. (For example:
rain, fog, snow, etc.)
—
When driving on slippery roads,
such as on ice or snow, etc.
—
When driving on winding or uneven
roads.
—
When there is a lane closure due to
road repairs.
—
When driving in a makeshift or
temporary lane.
—
When driving on roads where the
lane width is too narrow.
—
When driving with a tire that is not
within normal tire conditions (for
example, tire wear, low tire pressure,
installation of spare tire, tire chains,
non-standard wheels).
—
When the vehicle is equipped with
non-original brake parts or suspen-
sion parts.
. Excessive noise (for example, audio
system volume, open vehicle window)
will interfere with the chime sound, and
it may not be heard.
BSI DRIVING SITUATIONS
GUID-B2D19108-644E-40C2-A3ED-177B876F77E1
Indicator on
Indicator off
Indicator flashing
Condition:
To Next Page
Loading...
