Vehicle
Problem Possiblecauses/consequences and solutions
[Depress braketostart engine]
(DCT models only).You have attempted to startthe engine with the transmission in position N(Neutral) without depressing thebrakepedal.
Depressthe brakepedal.
[Toshift out of PorNdepress
brakeand startengine]
Youhave attempted to shift the shift lever to positionR(Reverse) or D(Drive) without starting the engine.
Startthe engine and depressthe brakepedal.
NOTE
•Itisonlypossibletomovethe shift lever from position P(Park) to the desired position if youdepressthe brakepedal. Only then
canthe parking lockbedeactivated.
•Attransmission fluid temperatures below -20
o
Cyou canonly shiftout of position P(Park) into another transmission position when the
engine is running.
[Apply braketodeselect Park (P)
po
sition]
Youhave attempted to shift the shift lever to position R(Reverse), N(Neutral) or D(Drive) without depressing the brakepedal.
Depres
sthe brakepedal.
[Risk of vehiclerolling Transmis-
sion not in P]
The driver’s doorisopen/not fully closed and the shift lever is in position R(Reverse), N(Neutral) or D(Drive).
Awarning tone also sounds
WARNING
The vehicle may roll away.
There is ariskofanaccident.
1.Pressthe P(Park) button.
2. Secure thevehicle against rolling away.
3. Close the driver’s door fully.
[Without changing gear, consult
workshop]
Youcannot change the transmission position due to amalfunction.
Awarning tone also sounds.
If transmission position D(Drive) is selected, Drive to an INFINITI Centre or qualified workshop without shifting the transmission from position D
(Drive).
If transmission position R(Reverse), N(Neutral) or P(Park), secure thevehicle against rolling away and consult an INFINITI Centre or qualified
workshop.
[Onlyselect Park (P) when
vehicleisstationary]
The vehicle is moving.
1.
Pull over and stop the vehicle safely as soon as possible, paying attention to road and traffic conditions.
2. Shiftthe shift lever to position P.
Instruments and controls 2-51
To Next Page
Loading...