EasyManua.ls Logo

Infinity QX30 - Page 118

Infinity QX30
460 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Problem Possiblecauses/consequences and solutions
[Reversing not poss. Consult
workshop]
The automatictransmission is malfunctioning. Youcannot driveinreverse.
Visit an INFINITI Centre or qualified workshop.
[Transmission Malfunction]
The automatic transmission is malfunctioning.
Visit an INFINITI Centre or qualified workshop.
[Transmission Malfunction Stop]
The automatic transmission is malfunctioning.
1.
Pull over and stop the vehicle safely as soon as possible, paying attention to road and traffic conditions, and switch
off the engine.
2. Secure the vehicle against rolling away
3. Consult an INFINITI Centre or qualified workshop.
[Stopvehicle Shift to PLeave
engine running]
The automatic transmission has overheated.
Drive on carefully.Ifthe display message disappears, the automatic transmission is availableagain.
If thedisplay message continues to be displayed:
1.
Pull over and stop the vehicle safely as soon as possible, paying attention to road and traffic conditions, and switch
off the engine.
2. Secure the vehicle against rolling away
3. Wait until the automatic transmission has cooled down and the displaymessage goes out.
[Auxiliarybatterymalfunction]
The auxiliarybatteryfor the automatic transmission is no longer beingcharged.
1.
Visit an INFINITI Centre or qualified workshop at thenext opportunity.
2. Until then, press the P(Park) button before youswitchoff the engine.
3. Before leaving the vehicle, apply the electric parking brake.
[Clutc hoverheated Avoid pulling
away Engage/disengageclutch
quicklyifreq.]
The clutchisunder considerable load and the permitted operatingtemperature has been exceeded. Awarning tone also sounds.
Avoid frequent pullingawayand driving at walking pace over longer distances
If the display message continues to be displayed:
1.
Pull over and stop the vehicle safely as soon as possible, paying attention to road and traffic conditions.
2. Secure thevehicle against rolling away
3. Leave the engine running. The clutch is cooled more quicklywith the engine running.
or
4. If possible, continue driving at asteady speed.
5. Remove your foot from the clutch pedal and do not allow the clutchtoslip The clutch mayalso cool down during the
journey.
It maytakeseveral minutes for it to cool down. When the clutch has cooled down, the display message disappears. The
clutch is fully operational again.
2-52 Instruments and controls

Related product manuals