AUTOMATIC CLIMATE CONTROL
(2–ZONE)
j
1
Sets the temperature, left
j
2
Setsclimate control to automatic mode
j
3
Demiststhe windscreen
j
4
Increases the airflow
j
5Sets the air distribution
j
6
Display
j
7
Activates/deactivates air-recirculation
mode
j
8
Switches climate control on/off
j
9
Sets thetemperature, right
j
10
Activates/deactivates the residual heat
function
j
11
Activates/deactivates cooling with air
dehumidification
j
12
Reduces the airflow
j
13
Switches the rear window heating on/off
j
14
Switches the ZONE function on/off
Operating tips
Anumber of tipsand recommendationstoen-
able youtoget the most out of your automatic
climatecontrol are listed below:
•
Activate climate control usingthe
m
and
m
buttons. The indicatorlampsinthe
m
and
m
button
slight up.
•
Set the temperature to 22
o
C
•
Only usethe “Windscreen demisting” function
briefly until the windscreen is clear again.
•
Only use air-recirculation mode briefly,e.g. if there
are unpleasant outside odours or when in atunnel.
The windows could otherwisemistupasnofresh
air is drawn into the vehicle in air-recirculation
mode
•
Usethe
m
function to adoptthe temperature
settings on the driver’s side for the front-passen-
gerside as well. The indicator lamp in the
m
button goes out.
NAA1643
4-40 Display screen, heater and air conditioner,and audio system
To Next Page
Loading...