EasyManua.ls Logo

Infinity QX30 - Page 25

Infinity QX30
460 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
To fold the seat:
1. Ensure head restraints are properly stowed,
see
Headrestraints later in thissection
.
2. Releasethe seatbacklockbypulling the re-
leasehandle.
3. Fold the seat forward.
4. Insert the seat belt into the seat belt holder.
To return the seat to an upright position:
1. Makesure the seat belts are clear of the seat
latchmechanism.
2. Lift theseatbackupand push firmly to lock.
3. If thered marker is visible then the seat has
not latched properly releaseand then re-
latchthe seat.
4. Adjust the head restraints from the stowed
position to aposition in whichthey lockse-
curely in place, see
Headrestraints later in
thissection
.
CAUTION
Alwaysensure that the seat belt is not trapped in the
releaselever or any other vehicle part.
ARMREST
(where fitted)
Rear
Pull the tab and draw the armrest
j
1forward
until it is horizontal.
WARNING
Head restraints supplement the other vehicle safety
systems. Theymay provide additional protection
againstinjuryincertain rear end collisions.Adjust the
head restraints properly, as specified in thissection.
Checkthe adjustment after someone else uses the
seat.Donot attachanything to the head restraint
stalksorremove the head restraint.Donot use the
seat if the head restrainthas been removed. If the
headrestraintwas removed, reinstalland properlyad-
justthe head restraint before an occupant uses the
seating position. Failure to follow these instructions
canreducethe effectivenessofthe head restraints.
Thismay increasethe riskof seriousinjuryordeath in
acollision.
Your vehicle is equipped with head restraints that
maybeintegrated, adjustable or non-adjustable.
Adjustable head restraints have multiple notches
alongthe stalk to lockthem in adesired adjust-
ment position.
The non-adjustable head restraints have asingle
locking notchtosecure them to the seat frame.
Proper Adjustment:
Forthe adjustable type, align the head re-
straintso thecentre ofyour earisapproxi-
mately level with the centre of the head
restraint.
NIC2669
NIC2611
HEAD RESTRAINTS
Safety seats, seat beltsand supplemental restraint system 1-5

Related product manuals