Display when the ICCsystem is
deactivated
j
1
Vehicle ahead, if detected
j
2
Distanc eindicator: current distancetothe
vehicle ahead
j
3
Specified minimum distancetothe vehicle
ahead; adjustable
j
4
Own vehicle
Display when the ICCsystem is
activated
Youwillinitially see the stored speed for about
five seconds when youactivate the ICCsystem.
j
1
Vehicle ahead, if detected
j
2
Specified minimum distancetothe vehicle
ahead; adjustable
j
3
Own vehicle
j
4
ICCstored speed (text only appearswhen
the cruisecontrol lever is actuated)
OPERATING ICC
Checkwhether the LIM indicator light
j
3isoff.
If the light is off,the ICCisalreadyselected.
If the light is on, quicklypushthe cruise control
button
j
6.The LIM indicator lightwill go off and
the ICCisnow operational.
To set cruising speed, accelerateyou vehicle to
thedesired speed and quicklypullthe cruise
control lever towards you
j
4,up
j
1ordown
j
5.Takeyour foot offthe accelerator pedal. Your
vehiclewillmaintain the set speed.
NOTE
If youdonot fully releasethe accelerator pedal, the
[ICCsuspended] message appearsinthe vehicle infor-
mation display.The set distancetoaslower-moving
vehicleinfront will then not be maintained. Youwill
be driving at the speedyou determine by the position
of the accelerator pedal.
Youcan also activate the ICCwhen stationary.
The lowest speed that canbeset is 30 km/h (20
MPH).
NSD614
NSD601
NSD582
NSD615
System set display with vehicle ahead
Starting and driving 5-45
To Next Page
Loading...