1. Placethe jack directlyunder the jack-uppoint
as illustrated sothatthe top ofthe jack con-
tacts the vehicle at the jack-up point.
CAUTION
Thejackshould be placed on firm level ground.
2. Alignthe centre of both the jack head and the
notches at the jack-up point as shown.
3. Fit the groove of the jack head between the
two notches as shown.
4. Loosen each wheel bolt by one or two turns
anticlockwisewith the wheel wrench.
Do notremove the wheel bolts until the tyre
is off the ground.
Models with wheel lockbolts (where fitted):
If the wheel is equipped with awheel lock
bolt, insertthe wheel lockkey
j
1and loosen
it as previously described.
Thewheel lockbolt canonlyberemoved with
the wheellockkey.Akey number is neces-
sary if youneed to duplicate the wheel lock
key.
Record the keynumber as shown on the key
code cardon the“Securityinformation” page
at theend of thismanual and keep it in asafe
place,notinthe vehicle. Ifyoulose the wheel
lockkey,see your INFINITI centre foradupli-
cate with the original wheel lockkey code.
Make sure to keep the lockkey in the vehicle.
Otherwise, wheels cannot be removed and
the service cannot be performed.
5. To lift the vehicle, securely hold and turn the
ratchet handle clockwiseasshown.
6. Carefullyraisethevehicle untilthetyre clears
the ground.
7. Remove the wheel bolts, then remove the
wheel with the flat tyre.
CAUTION
The wheelisheavy.Besure that your feet are clear of
the wheeland useglovesas necessaryto avoid injury.
Installing the wheel
WARNING
•
Atemporaryuse spare wheel and tyre is designed
for emergency use.
•
Never usewheel bolts other than those provided
with your vehicle. Incorrect wheel bolts or improp-
erly tightened wheel bolts maycause the wheel to
become loose or come off.Thiscould causeanac-
cident.
•
Never useoil or greaseonthe wheel bolts. This
maycause the wheel bolts to become loose.
j
A
Tighten
j
B
Loosen
NCE143Z
NCE449
NCE435
6-8 In case of emergency
To Next Page
Loading...