WARNING
Be sure the ignition switch is in the OFF position. Oth-
erwisethe cooling fanorthe engine maystart to oper-
ate suddenly.
1. Visually inspecteach belt forsignsofunusual
wear,cuts, fraying orlooseness.Ifthe belt is
in poor condition or loose, have it replaced or
adjusted by an INFINITI Centre or qualified
workshop.
2. Have the belts checkedregularly for condi-
tionand tension inaccordancewiththe main-
tenanceschedule as shown in aseparately
provided Warranty Information and Mainte-
nancebooklet.
WARNING
Be sure the engine and ignition switch are off andthat
the parking brakeisapplied.
CAUTION
•
Be sure to usethe correct sockettoremove the
sparkplugs. An incorrect socketcan causedam-
agetothe spark plugs.
•
Alwaysreplacespark plugs with recommended or
equivalent ones.
Replacethe spark plugs according to the main-
tenanceschedule shown in aseparate mainte-
nancebooklet.
If replacementisrequired, contact an INFINITI
Centre or qualified workshop.
CHECKINGPARKING BRAKE
Periodicallycheckthe holding ability ofthe park-
ingbrake by parkingon asteep hilland restrain-
ing the vehicle by using only the parking brake.
If it does nothold satisfactorily,see an INFINITI
centre dealer or qualified workshop.
CHECKING BRAKE PEDAL
If thebrake pedal suddenly goes down further
than normal, the pedal feels “spongy” or the
vehicleseems to take longer to stop, see an
INFINITI centre dealer or qualified workshop.
Self-adjusting brakes
Your vehicle is equipped with self-adjusting
brakes. The disc-type brakes self-adjust every
time thebrake pedal is applied.
DRIVE BELTSPARK PLUGS (Models with petrol engine) BRAKES
8-12 Maintenanceand do-it-yourself
To Next Page
Loading...