3. Move wiper blade
j
1inthe direction of ar-
row
j
3awayfrom wiper arm
j
4.
4. Remove wiper blade
j
1inthe direction of
arrow
j
5.
Fitting awiper blade
1. Position new wiper blade
j
1with recess
j
6
on lug
j
5.
2. Move wiper blade
j
1inthe direction of ar-
row
j
3onto the wiper arm until retaining
clips
j
2engageinbracket
j
4.
3. Makesure that wiper blade
j
1isseated cor-
rectly.
4. Move the wiper arm backonto the rear win-
dow.
WINDSCREEN WASHER NOZZLE
If youwax the surface of the engine bonnet, be
careful not to let waxget into the washer nozzle
j
A.Thismay causeclogging or improper wind-
screen washer operation. If waxgets into the
nozzle, remove it with aneedle or smallpin
j
B.
NDI1589
NDI892Z
8-16 Maintenanceand do-it-yourself
To Next Page