If youactivate the [Automatic door locks]func-
tion, the vehicle is centrally lockedabove a
speed of around15km/h.
Forfurther information on the automaticlocking
feature, see
“Automatic locking feature” later in this
section
Activating/deactivating the acoustic locking
confirmation:
If youswitchonthe [Acoustic Lock feedback]
function, an acoustic signal sounds when you
lockthe vehicle.
1. Press the
m
or
m
buttononthe steering
wheel to select the [Settings]menu.
2. Pressthe
m
or
m
buttontoselect [Ve-
hicle] submenu.
3. Press <OK> to confirm.
4. Press the
m
or
m
button to select the
[Acoustic Lock feedback] function.
If the [Acoustic Lock feedback] function is ac-
tivated, the
m
symbol in thevehicle infor-
mation display lights up orange.
5. Pressthe <OK> button to save the setting.
Convenience
Switching the [Fold mirrors in when locking]
function on/off:
Thisfunction is only available when the vehicle
is equipped with the electrical fold-in function.
When youactivate the [Fold mirrors in when
locking] function, the exterior mirrorsare folded
in when thevehicle is locked. If youunlockthe
vehicle and then open the driver’s or frontpas-
sengerdoor,the exterior mirrors fold out again.
Ifyouhave switchedon the[Foldmirrors inwhen
locking]functionandyoufoldin theexteriormir-
rors using the button on the door (see
“Folding”
in the “3.Pre-driving checks and adjustments” sec-
tion
), they will not fold out automatically.The
exterior mirrorscan then only be folded out us-
ing the button on the door.
1. Pressthe
m
or
m
buttononthe steering
wheel to select the [Settings]menu.
2. Pressthe
m
or
m
buttontoselect [Con-
venience]submenu.
3. Press<OK> to confirm.
4. Press the
m
or
m
button to select the
[Fold mirrorsinwhen locking] function.
If the [Fold mirrors in when locking] function
is activated, the vehicle’s exterior mirror is
shown in orangeinthe vehicle information
display.
5. Pressthe <OK> button to save the setting.
Resetting to factorysettings
1. Pressthe
m
or
m
buttononthe steering
wheel to select the [Settings]menu.
2. Pressthe
m
or
m
buttontoselect [Fac-
torysetting] submenu.
3. Press <OK> to confirm.
The [Reset allsettings?] message appears.
4. Press the
m
or
m
buttontoselect [No] or
[Yes].
5. Pressthe <OK> button to confirm the selec-
tion.
If youhave selected [Yes],the vehicle infor-
mation display shows aconfirmation mes-
sage.
Forsafety reasons, not allfunctionsare reset:
the [Limit speed (winter tyres):] function in per-
manent speed limiter canonlybeset in the [Ve-
hicle] submenu.
If youwant to reset the Daytime driving lights
functionin theLights submenu,youmustswitch
the ignition switch to the ACCposition.
Instrumentsand controls 2-23
To Next Page
Loading...