Infinity QX80 - 3 rd Row Power Folding Seats

12
first drive features
3
rd
Row Power Folding Seats
The 3
rd
row seats can be folded flat for maximum
cargo hauling or extra storage space.
Before folding down the 3
rd
row seats:
• Apply the parking brake.
• The vehicle’s shift lever must be in P (PARK)
or N (NEUTRAL).
• Place the seat belt buckles in the storage of the seat
cushion
1
to avoid dropping them under the seat
cushion or causing damage to your leather seats.
• Disconnect and secure the center seat belt and
tongues into the retractor base
2
.
1. To release the seat belt connector tongue, insert
a suitable tool (a key, for example) into the
opening on the side of the connector buckle.
2. Retract the seat belt up to the retractor base
located in the rear ceiling storage area.
3. Insert the seat belt tongue into the fabric sleeve
so that it will lay flat.
4. Secure the connector tongue into the retractor base.
5. Always reconnect the center seat belt when the
seat is returned to the upright position.
• Make sure that there are no objects on the
seat cushion.
• Lower the 3
rd
row head restraints.
To lower the seat, push and hold the front portion
A
of the right or left 3
rd
row power folding seat switch
1
.
To return the seat to an upright position, press the back portion
B
of the right or left 3rd row
power folding seat switch
1
.
For more information, refer to the “Safety — Seats, seat belts and supplemental restraint system (section 1)” of
your Owner’s Manual.
1
2
1
B A
B A