Need help?Do you have a question about the Infinity Renaissance 90 and is the answer not in the manual?
Cautionary advice for handling Renaissance speakers, particularly concerning sharp spikes.
Instructions for inspecting speakers for transit damage and storing original packaging.
Guidance on selecting high-quality audio components to complement Renaissance speakers.
Recommendations for amplifier power and speaker wire gauge for optimal sound.
Instructions on connecting speakers in-phase for accurate sound imaging and bass.
Importance of tightening input terminal locking nuts for optimal contact and minimal distortion.
Steps for connecting two amplifiers to drive bass and treble/midrange sections separately.
Guidance on assigning the higher power amplifier to drive the woofer section.
Description of using two connecting wires to share current for improved sonic results.
Advice on setting equalizer, tone, and volume controls to avoid strain and damage.
Guidelines for safely changing inputs, records, and connections to prevent transients.
How room surfaces and placement affect sound quality, reflections, and brightness.
Techniques for moving speakers to improve focus, imaging, and sound stage depth.
Instructions for ensuring speakers are equidistant from the wall and angled identically.
Advice on avoiding room corners to prevent excessive or inarticulate bass response.
Visual alignment method to ensure both speakers are tilted identically for consistent sound.
Procedure for raising or lowering rear spikes to adjust speaker tilt and bass articulation.
Using supplied plastic caps and adhesive to protect floors from sharp speaker spikes.
Caution against tilting speakers forward to prevent tipping and injury.
Explanation of the electronic protection circuit for the EMIT™ tweeter against clipping distortion.
Instructions for carefully removing and reinstalling the speaker grille assembly.
How to use soft furnishings and absorb sound to prevent brightness and distortion.
Using a clapping test to determine the acoustic balance of a listening room.
The role of furniture and carpeting in reducing reflections and affecting frequency balance.
Experimenting with speaker orientation and position for optimal stereo imaging and sound stage.
Understanding how amplifier phase inversion affects speaker connections.
Diagnosing and mitigating acoustic feedback loops affecting turntables and CD players.
Guidance on cleaning and maintaining the wood finish and grille cloth.
Using amplifier channels to isolate audio system faults and identify speaker issues.
Procedures for seeking assistance from authorized dealers or Infinity customer service.
To Next Page
General