Infinity Kappa Series perfect5.1 User Manual

Thank you for purchasing an Infinity Kappa Perfect component
system. Kappa Perfect components have been engineered to provide
the most accurate sonic reproduction possible. Over the years, we at
Infinity have listened to hundreds of automotive speakers and we
think these are among the finest. We hope you agree.
This manual includes information that will make your installation as
simple and trouble-free as possible. It also provides detailed technical
information that will help an experienced installer optimize speaker
placement and crossover adjustment. Please study this manual before
you begin your installation. Remember to send in your warranty
registration card, and keep your sales receipt somewhere safe in case
you need warranty service.
kappa series
perfect5.1
perfect6.1
instructions

Infinity Kappa Series perfect5.1 Specifications

General

Configuration	5.1
Impedance	8 Ohms
Color	Black
Tweeter Size	1"
Speaker Type	5.1 Channel Home Theater Speaker System

Summary

Important Information and Warnings

Important Installation Note

Installation requires extensive experience; consult authorized dealers for professional options if unsure.

Hearing Safety Warning

Playing loud music can damage hearing and hinder traffic awareness; use low volume while driving.

System Performance Note

Kappa Perfect components require a 50W RMS per channel amplifier; bi-amping with electronic crossovers is not recommended.

Speaker Placement Options

Woofer and Tweeter in Kick Panels

Mounting woofer and tweeter in kick panels for best staging and imaging.

Woofer in Door, Tweeter in Kick Panel

Alternative placement with woofer in the door and tweeter in the kick panel.

Woofer and Tweeter in Doors

Mounting both woofer and tweeter in the doors.

Woofer in Door, Tweeter in Dash

Placement with woofer in door and tweeter in the dash.

Tweeter Installation Methods

Surface-Mounting the Tweeter

Illustrates the method for surface-mounting the tweeter.

Flush-Mounting the Tweeter

Illustrates the method for flush-mounting the tweeter.

Woofer Installation

Woofer Mounting Without Factory Location

Mounting the P5.1 or P6.1 woofer where no factory speaker location exists.

P6.1 Woofer in 5-1/4" Holes

Mounting the P6.1 woofer in standard 5-1/4 inch factory locations.

P6.1 Woofer in 165mm Holes

Mounting the P6.1 woofer in 165mm factory locations.

Electrical Connections and Crossover Adjustments

Connecting Speakers to Crossover

Diagram showing how to connect speakers and amplifier to the crossover.

Crossover Level Adjustment

Instructions on adjusting the crossover tweeter level using provided jumpers.

Specifications and System Response

Product Specifications

Detailed technical specifications for the Kappa Perfect P5.1 and P6.1 systems.

System Response Curves

Frequency response and impedance curves for the Kappa Perfect 6.1 and 5.1 systems.