Need help?Do you have a question about the Infinium OMNI and is the answer not in the manual?
General| Model | OMNI |
|---|---|
| Application | Fetal Monitoring |
| Display | LCD |
| Power Source | AC Power, Battery |
| Battery | Rechargeable lithium battery, >4 hours continuous working time |
| TOCO Range | 0-100% |
| Printing | Thermal Printer |
| Paper Speed | 1, 2, 3 cm/min |
Discusses explosion, prescription use, defibrillator proof, lifting, and patient conditions.
Details the controls and indicators on the front view of the OMNI (K) main unit.
Details the controls and indicators on the left side panel of the OMNI (K) unit.
Details the controls and indicators on the rear and right side panels of the unit.
Details setup options including printer, alarms, network, language, and system configuration.
Covers visual indicators, alarm suspend, auditory signals, key beeps, and alarm switch.
Details electrode placement for 5-lead ECG and sensor installation procedures.
Explains how to set ECG parameters and configure ECG waveforms.
Provides NIBP overview, cuff fitting steps, and module initialization check.
Details NIBP setup options, patient types, inflation modes, and alarm limits.
Covers safety compliance, application scope, and physical specifications.
Details display, waveform capabilities, indicators, and trend time features.
Lists ECG standards, lead choices, gain, CMRR, frequency, sweep speed, HR.
Covers respiration measurement method, range, accuracy, and NIBP technology, range, accuracy.
Details temperature, SpO2, and IBP measurement ranges, accuracy, and scales.
Lists EtCO2 measurement range, accuracy, and anesthetic agent specifications.
Covers networking capabilities, power source, and environmental operating conditions.
Details EMC compliance, immunity tests, and RF separation distances.
To Next Page
