Need help?Do you have a question about the Infinium OMNI K and is the answer not in the manual?
Crucial safety precautions for operating the OMNI(K) patient monitor, including explosion and electrical hazards.
Specifies the purpose and application of the OMNI(K) patient monitor across various medical settings.
Describes access to factory settings and the password usage for system configuration.
Step-by-step guide to connect sensors and start patient monitoring.
Explains how the monitor indicates alarms visually and audibly.
Details High, Medium, and Low priority alarm categories and their management.
Guidance on proper placement of ECG electrodes on the patient.
Detailed instructions for 5-lead ECG electrode placement on the chest and limbs.
How to access and configure ECG monitoring parameters.
Instructions for placing respiration monitoring electrodes on the thorax.
Guidance on connecting the SpO2 sensor to the monitor.
Instructions on selecting and applying the NIBP cuff for accurate readings.
Steps to initialize the NIBP module before monitoring.
Guidance on connecting the temperature sensor to the monitor.
Important safety warnings for EtCO2 monitoring, covering cable placement and reuse.
Procedure for zeroing the CO2 module for accurate readings.
Steps required before initiating invasive pressure monitoring.
Instructions for connecting the IBP transducer cable to the monitor.
Critical safety precautions for using the IRMA probe and adapters.
Steps for assembling and connecting the IRMA probe to the OMNI(K).
Recommended steps for accurate IRMA probe zeroing.
Safety classifications and critical warnings for ISA analyzers.
Information on battery charging, low power indicators, and automatic shut-off.
General| Brand | Infinium |
|---|---|
| Model | OMNI K |
| Category | Medical Equipment |
| Language | English |
To Next Page
