26
Using the Projector
To raise the projector:
1 Press and hold the elevator button (Figure 22).
2 Raise the projector to the height you want, then release the
button to lock the elevator foot into position.
3 If necessary, use the leveling knob (Figure 23) to adjust the
angle of the projected image.
F
IGURE
24
Adjusting the height of the projector
To lower the projector:
1 Press the elevator button.
2 Lower the projector.
3 If necessary, use the leveling knob (Figure 23) to readjust the
angle of the projected image.
Downloaded From projector-manual.com Boxlight Manuals
To Next Page
Loading...
