Need help?Do you have a question about the InFocus LP540 and is the answer not in the manual?
Display| native resolution | XGA 1024 x 768 |
|---|---|
| brightness | 1700 max ANSI lumens |
| brightness uniformity | 75% |
| contrast ratio | 400:1 |
| number of colours | 16.7 million |
Projection| projection distance | 1.5 m-10.0 m (5'-32.8') |
|---|---|
| image size (diagonal) | 1.0 m to greater than 7.5 m / 40" to greater than 300" |
| aspect ratio | 4:3 Native Aspect Ratio |
| zoom ratio | 1.2:1 |
| throw ratio | 1.6:1-1.9:1 (D:W) |
Lamp| lamp type | 170 W UHP |
|---|---|
| lamp life | 2000 hours* |
| lamp warranty | 90 days or 500 hours, whichever comes first |
Power| power consumption | 260 watts |
|---|---|
| power supply | 85V-240V at 50-60 Hz |
Operating Environment| operating temperature | 10°-35°C at sea level (0'-10, 000'), 50°-95°F |
|---|---|
| audible noise | 34dB |
Dimensions and Weight| dimensions | 10.3 cm (H) x 26.0 (L) cm x 29.4 cm (W) /4.1" x 10.3" x 11.6" |
|---|---|
| weight | 3.4 kg / 7.5 lbs |
Provides guidelines for safe installation, operation, and handling of the projector.
Details safety precautions regarding ventilation, clearances, and power connections.
Covers safety measures for handling and disposing of the projector lamp.
Step-by-step guide for connecting a computer to the projector.
Steps to display a computer image, including lens cap removal and power on.
Ensuring the computer's external video port is active for display.
Guide through the 'New Hardware Wizard' for driver installation.
Steps for installing the necessary drivers for projector compatibility.
Adjusting image focus, zoom, and correcting vertical keystone distortion.
Explains the meaning of different projector indicator light colors and patterns.
Troubleshooting steps when no startup screen or blank screen appears.
Resolving issues where only the startup screen is displayed.
Troubleshooting the 'Signal Out of Range' message by adjusting refresh rate.
Steps to resolve blurry or cropped images by adjusting resolution.
Correcting non-rectangular images and adjusting image sharpness.
Correcting upside-down or mirrored image orientation.
Diagnosing and resolving lamp failure indicated by a red flashing light.
Adjusting image position and centering for optimal viewing.
Instructions for operating the remote control and troubleshooting common issues.
Using the Effect key for functions like freeze, zoom, and blank screen.
Step-by-step guide for safely replacing the projector lamp module.
Instructions on how to reset the lamp usage timer after replacement.
Details the meaning of different red indicator light blinking patterns.
To Next Page
