InFocus SimpleShare INA-SIMCH1 - How to Use

3
3. How to use
1. Connect Power Adapter at DC socket and plug into an electrical outlet.
2. Insert SimpleShare Transmitters to charging terminal of the Transmitter tray.
3. Charging LED on SimpleShare Transmitters will glow red when charging.
4. Charging LED will turn o󰀨 when charging is complete.
5. When charging is complete, disconnect KinectIQ Transmitters from charging
terminal.
4. Charging LED on the trasmitter
1. Red: On charging.
2. Red blinking: The transmitter is ON. Pleaser turn OFF the transmitter.
3. Clear: Charging completed.
LED Status Description
No Light
RED Solid Charging
No power
Charging complete
Transmitter is ON
*Turn OFF the Transmitter in order to charge
RED Blinking